The Advantest R6452E is a dual-channel digital multimeter delivering simultaneous measurement of two independent signals with independent 5.5-digit displays. This full-function instrument combines high-resolution DC voltage accuracy (180 ppm + 5 digits) with sampling rates up to 80 SPS and support for thermocouple temperature measurement via rear-panel Type K input. Channel A offers nine measurement functions—DC and AC voltage, DC and AC current, 2-wire and low-power resistance, frequency, diode test, and continuity—while Channel B supports DC voltage, DC current, and AC current measurement. True RMS conversion is native to all AC measurements.
– Technical Specifications
• Display Resolution: 199999 counts (5.5 digits) per channel
• Sampling Rates: FAST 80 SPS (1999-count max), MED 10 SPS, SLOW 2.5 SPS (199999-count max)
• DC Voltage Accuracy: 180 ppm + 5 digits at 23°C ±5°C, ≤85% RH; temperature coefficient 0.1 × (measurement accuracy)/°C across 0–50°C
• DC Voltage Range: 1 µV resolution, 0.001 V DC to 1.0 kV DC
• AC Voltage: 20 Hz to 100 kHz, 200 mV to 700 V, True RMS
• DC Current: 200 mA and 10 A ranges with 1 µA resolution (200 mA range)
• AC Current: 20 Hz to 5 kHz, 200 mA and 10 A ranges, True RMS
• Resistance Measurement: 2-wire and low-power modes with terminal resistance ≤1.5 Ω (200 mA) or ≤0.04 Ω (10 A)
• Frequency Measurement: Supported
• Temperature Input: Type K thermocouple, rear-panel connection
• Overcurrent Protection: 200 mA range: 0.5 A / 250 V IEC 127 fuse; 10 A range: 15 A / 250 V with 10,000-A interrupting capacity
• Power Supply: 90–250 V wide input range
– Key Features
• Dual independent measurement channels with synchronized dual displays
• Channel A: nine complete measurement functions; Channel B: three core functions
• Native True RMS capability for accurate AC measurements on non-sinusoidal signals
• ±5 digit accuracy with temperature tracking across operating range
– Typical Applications
Suitable for R&D, manufacturing, and quality control environments requiring simultaneous two-point signal verification and high-resolution electrical characterization.
– Compatibility & Integration
• RS-232C standard interface
• Optional GPIB and BCD Data Output interfaces available
• SRAM Card memory (JEIDA Ver. 4) for data transfer to personal computers
• Half-width 19″ 2U rack or benchtop form factor
• Manufactured in Japan
Reviews
There are no reviews yet.