Agilent/Keysight 54200D

The Agilent/Keysight 54200D is a 50 MHz digitizing oscilloscope featuring dual 200 megasample/second digitizers, designed for signal visualization and measurement tasks. This instrument offers advanced triggering capabilities, including state, missing bit, and extra bit triggering, along with parallel and serial logic trigger qualification. It provides pre-trigger display functionality, automatic waveform measurements, and multiple display modes such as infinite persistence, envelope, and average. The 54200D is suitable for a range of electronics testing, research, and development applications requiring accurate signal analysis.

### Technical Specifications

**General**
* **Bandwidth:** 50 MHz
* **Sampling Rate:** 200 megasamples/second (MSa/s)
* **Channels:** 2
* **Acquisition Memory:** 1 kbyte per channel
* **Single-Shot Bandwidth:** 50 MHz (using post-capture data interpolation)
* **Pre-Trigger Storage:** 1 screen diameter

**Vertical System (Channel 1 and 2)**
* **Full-Scale Range:** 40 mV to 40 V, continuously calibrated with two-digit resolution
* **Gain Accuracy:** ±2% of full-scale
* **Vertical Resolution:** 8-bit (A/D Conversion)
* **Input Coupling:** DC, AC, GND
* **Maximum Safe Input:** 140 V peak

**Horizontal System (Time Base)**
* **Time Base Range:** 50 ns to 10 seconds per full scale (10 divisions), in a 1-2-5 sequence.
* **Jitter:** Specifications apply after a 30-minute warm-up period.

**Trigger System**
* **Trigger Modes:**
* **State Triggering (54200D only):** Up to 27 channels, with parallel and serial logic trigger qualification capabilities.
* **Missing Bit Triggering (54200D only)**
* **Extra Bit Triggering (54200D only)**
* **Digital Logic Trigger Qualification (54200D only)**
* **State Trigger Clock Repetition Rate:**
* Single Phase: 25 MHz maximum (single clock, single edge)
* Multiplexed: 20 MHz maximum (any ORed combination of clocks and edges)
* **Master-Slave Clock Timing:** Master clock must follow slave clock by at least 10 ns and precede the next slave clock by 50 ns or more.
* **Pre-trigger Delay:** 0 seconds (time data must be present after the clock transition)
* **Trigger Qualification:** Parallel and serial logic trigger qualification capabilities.
* **TTL and ECL Preset Capabilities:** Automatically set up vertical range, offset, and trigger levels for digital signals.

**Measurement Capabilities**
* **Automatic Measurements:** Waveform parameters (e.g., pulse parameters).
* **Display Modes:** Infinite persistence, envelope, average, and live waveform display.
* **Cursors:** Time/voltage cursors for measurements on live and stored waveforms.
* **Auto-Scaling:** Automatically scales the input signal for display.

**Interfaces**
* **HP-IB (IEEE-488):** All front-panel controllable parameters can be programmed via HP-IB.

**Physical Characteristics**
* **Power Requirements:**
* 115 VAC: -22% to +10% (90 – 127 VAC)
* 230 VAC: -22% to +10% (180 – 253 VAC)
* Frequency Range: 48 to 66 Hz
* Maximum Power Consumption: 275 VA
* **Environmental:**
* Altitude: To 4600 meters (15,000 feet)
* Vibration: Vibrated in three planes for 15 minutes each with 0.38 mm (0.015 inch) excursions at 5 to 55 Hz.
* X-RAY EMISSION: Less than 0.05 mr/hr.
* **Dimensions:** 16 × 14 × 10 inches (approximate shipping dimensions)
* **Weight:** 25 lbs (approximate shipping weight)

**Included Accessories**
* Two Model 10017A 10:1 divider probes
* One BNC to probe tip adapter
* One 2.3 meter (7.5 ft) power cord
* One Operating, Programming, and Service Manual

### Why Choose Aumictech for Agilent/Keysight 54200D?

At Aumictech, we specialize in supplying high-end test and measurement equipment. Whether you need a reliable digital oscilloscope for complex signal analysis, a versatile instrument for research and development, or a robust solution for electronics testing, our team ensures the Agilent/Keysight 54200D delivers maximum performance for your application.