Agilent/Keysight N2266A

The Agilent/Keysight N2266A is a high-density, reconfigurable multiplexer module engineered for production test environments requiring flexible channel switching and signal integrity. It delivers configurable architectures spanning 1-wire, 2-wire, and 4-wire topologies, with scan rates reaching 350 channels per second. The module operates in SCPI or 3488A modes and supports four primary configurations: single 80-channel 1-wire MUX, single 40-channel 2-wire MUX, dual independent 20-channel 2-wire MUXs, or single 20-channel 4-wire MUX.

– Technical Specifications

Electrical Performance
• Maximum scan rate: 350 channels/second
• Maximum current: 0.5 A DC or AC peak
• Maximum voltage: 200 V AC peak
• Maximum power: 10 W DC or AC peak
• Initial closed channel resistance: 10¹⁰ Ω
• AC isolation capacitance (channel-channel): < 7 pF
• AC isolation capacitance (HI-LO): < 50 pF
• AC isolation capacitance (channel-chassis): < 140 pF

Insertion Loss (50 Ω termination)
• 100 kHz: < 0.20 dB
• 1 MHz: < 0.30 dB
• 10 MHz: < 2.0 dB
• 40 MHz: < 3.0 dB

Crosstalk (50 Ω termination)
• 100 kHz: < −75 dB
• 1 MHz: < −55 dB
• 10 MHz: < −33 dB

Relay Characteristics
• Thermal offset voltage: < 3 µV to < 50 µV
• Mechanical life: 10⁸ cycles at 1 V, 1 mA
• Reed relay technology for non-latching operation and armature latching relay configurations

– Key Features

• Multi-mode architecture supporting simultaneous independent multiplexing
• High-speed reed relays for rapid channel scanning
• Dual relay technology enabling flexible signal path configurations
• Configurable channel densities from 20 to 80 channels per module
• Low insertion loss and crosstalk across audio and RF frequencies

– Compatibility & Integration

The N2266A installs in Agilent/Keysight 3499A, 3499B, and 3499C mainframes. Controller board 2.0 with firmware revision 4.0 or later is required. Terminal block extensions add 8.5 cm beyond the rear panel. Accessory options include N2290A screw terminal blocks, N2297A DIN96-to-Twin-D50 cables, and N2299A DIN96-to-Quad-D25 cables.