The Ametek Xantrex Sorensen XDC 60-100 is a 6000 Watt series digital DC power supply designed for demanding applications requiring precise control and reliable performance. This unit is suitable for laboratory testing, industrial automation, and power electronics development, offering stable output and comprehensive protection features.
### Technical Specifications
**General**
* **Manufacturer:** Ametek / Xantrex / Sorensen
* **Model:** XDC 60-100
* **Product Family:** XDC Series
* **Output Power:** 6000 W (6 kW)
**Electrical Specifications**
* **AC Input Voltage:**
* 3-phase 190-242 VAC (47-63 Hz) (standard)
* 3-phase 342-500 VAC, 47-63 Hz, 3 wire and safety ground (optional)
* **Power Factor:**
* Minimum 0.95 (nominal 208 Vrms)
* Minimum 0.9 (nominal 400 Vrms HV input option)
* **Output Voltage:** 0 to 60 Vdc (The XDC 100-60 model offers 0 to 100 Vdc)
* **Output Current:** 0 to 100 A (The XDC 100-60 model offers 0 to 60 A)
* **Output Noise & Ripple:**
* p-p (10 Hz-20 MHz): 85 mVp-p
* rms (10 Hz-100 kHz): Voltage 10 mV, Current 500 mA
* **Load Regulation:**
* Voltage: 10 mV
* Current: 300 mA
* **Efficiency:** 82% minimum (typical 89% at nominal line voltage and ambient temperature)
* **Minimum Output Voltage:** <0.3% of rated voltage at zero output setting (Some sources indicate <0.15% of rated voltage)
* **Minimum Output Current:** <0.2% of rated current at zero output setting with rated load resistance**Protection Features**
* Over and under voltage protection
* Over and under current protection
* Over and under power protection
* Over temperature protection
* Sense protection**Interfaces**
* **Remote Analog Programming:**
* Voltage and current programming inputs
* 0-5 V, 0-10 V (default) voltage sources
* Galvanically isolated from supply output
* **Remote Analog Monitoring:**
* Voltage and current monitor outputs
* 0-5 V, 0-10 V (default) ranges for 0-100% of output
* Galvanically isolated from supply output
* **Communication:**
* RS-232 interface
* GPIB (IEEE 488.2 with SCPI) (Optional)
* CANbus communications link for multiple unit current sharing and addressing (Optional)**Physical Characteristics**
* **Dimensions (HxWxD):**
* 5.22 x 19.0 x 21.0” (133 x 483 x 533 mm) (This appears to be for the 6kW model without the 12kW package)
* 5.25-inch high rack package (3U) for 6000 W models
* 10.5-inch high rack package (6U) for 12000 W models
* **Weight:** Approximately 75 lb (34 kg) (This may refer to the 6kW model as listed in source)
* **Weight:** Approximately 170 lb (77 kg) or 170 lb (This likely refers to the 12kW models or a different configuration)**Environmental**
* **Operating Temperature:** 0° to 50°C (Consult factory for operation below 0°C and above 50°C)**Approvals and Compliance**
* CE marked units meet: EN61010-1, EN61000-6-2 and EN61000-6-4
* CSA C/US certified to UL3111-1 and CSA C22.2 No 1010.1
* Meets USA EMC standard: FCC, part 15B, class A
* Meets Canadian EMC standard: ICES-001 Class A**Key Features**
* **Embedded Controller:** Features menu-driven auto-sequencing for complex test programs without external computers or software.
* **Auto Sequencing:** Capable of constructing and executing up to ten different test programs, each with up to 99 voltage level steps.
* **Configuration Storage:** Ten configurations of differing protection and output set points can be stored, recalled, or set as default.
* **Zero Voltage "Soft" Switching:** For efficient and reliable operation.
* **Power Factor Correction (PFC):** Ensures efficient power utilization.
* **Constant Power Mode:** Provides stable output under varying load conditions.
* **Current Sharing:** Enables parallel operation for higher power systems by connecting slave modules to a master unit via CANbus.
* **Remote Sense:** Features 5V line loss compensation for accurate output voltage at the load.
* **Software Drivers:** LabVIEW® and LabWindows® drivers available.Why Choose Aumictech for the Ametek / Xantrex / Sorensen XDC 60-100?
At Aumictech, we specialize in supplying high-end programmable DC power supplies. Whether you need precise voltage and current control for R&D, reliable power for automated test equipment (ATE), or robust solutions for industrial applications, our team ensures the Ametek / Xantrex / Sorensen XDC 60-100 delivers maximum performance for your specific needs.
Reviews
There are no reviews yet.