California Instruments 12000LX 12kVA AC Power Source

The California Instruments 12000LX/2 is a high-power AC power source designed for testing and simulating various AC power conditions. It is a versatile instrument capable of providing precise AC power with advanced measurement capabilities. This unit is suitable for demanding applications within aerospace, defense, and regulatory compliance testing environments.

### Technical Specifications

**Model and Power Output:**
* **Model:** California Instruments 12000LX/2
* **Total Output Power:** 12 kVA
* **Chassis Configuration:** /2 designation indicates a dual-chassis system

**Electrical Specifications:**
* **Output Voltage Ranges:**
* Low range: 0 – 150 Vrms (Line to Neutral)
* High range: 0 – 300 Vrms (Line to Neutral)
* Optional output range options up to 400 Vrms are available
* **Output Frequency:**
* Standard: 45 Hz to 1000 Hz
* With HF option, up to 5000 Hz for models 3000Lx, 4500Lx, 6000Lx
* With HF option, up to 2000 Hz for models 9000Lx/2, 12000Lx/2, 13500Lx/3, 18000Lx/3
* **Output Current:** Maximum RMS current varies based on voltage range and model. For the 12000LX/2, refer to specific current charts in technical documentation. For instance, in three-phase mode with a low voltage range, current can reach up to 12.8 A per phase.
* **Phase Configuration:**
* Single-phase or Three-phase modes available
* The /2 designation indicates a dual-chassis system, supporting specific configurations.
* **Input Voltage:**
* Nominal Input Voltage: 208-230 V (Line to Line, three phase, delta or wye)
* Optional 400 V (Line to Line) AC input available
* **Power Line Regulation:** ±0.02% for a 10% input line change
* **Load Regulation:**
* ALC mode ON: 0.1% FS
* External Sense: Up to 10% of programmed value can be dropped across each load lead for Fout < 400 Hz. Up to 2.5% for Fout > 400 Hz.
* **Stability:** ±0.05% FS over 24 hours (constant line, load, and temperature, ALC on)
* **Temperature Coefficient:** ±0.05 V/°C
* **Output Coupling:** Transformer coupled
* **Output Impedance (Z):** Z = Vrange * 0.001 / I_load
* **Distortion (THD):**
* Standard: < 1% (45-1000 Hz), < 1% + 1%/kHz (> 1000 Hz) (harmonics and noise to 300 kHz)
* With HF and LKM option: < 2% (45-1000 Hz), < 2% + 1%/kHz (> 1000 Hz) (harmonics and noise to 300 kHz)
* **DC Offset Voltage:** 0.0 V
* **Output Noise:** < 100 mVRMS typical (20 kHz to 1 MHz)**Waveform Capabilities:** * **Standard Waveforms:** Sinewave, Squarewave, Clipped Sinewave * **Arbitrary Waveform Generation:** Capable of generating user-defined waveforms downloaded over the bus * **Harmonic Waveform Generation:** Utilizes DSP technology to generate harmonic waveforms for testing harmonics susceptibility**Measurement and Analysis:** * **Integrated Power Analyzer:** Measures voltage and load current harmonics, and acquires waveforms * **Harmonic Analysis:** Measures voltage and current amplitude and phase harmonics up to the 50th harmonic (for fundamental frequencies up to 250 Hz) * **Total Harmonic Distortion (THD):** Available for both voltage and current * **Waveform Digitization:** Real-time digitization of voltage and current waveforms using a 4K sample buffer**Interfaces and Control:** * **Programmable Control:** * Microprocessor controlled with front panel keypad and analog controls * Supports SCPI (Standard Commands for Programmable Instruments) command language * **Remote Control Interfaces:** * IEEE-488 (GPIB) * RS232C Serial Interface * USB Interface * Optional Ethernet LAN interface * **Programming Manual:** Available for detailed programming information**Compliance and Standards:** * **Regulatory Compliance:** Designed for applications requiring regulatory compliance testing * **Standard Options:** * RTCA/DO-160D testing * MIL-STD-704 Rev D through F (MIL704 Mode) * MIL-STD-704 Rev A through F (MS704 Mode) * Airbus test standards * **Certifications:** CE Marked (for 400V input model ONLY)**Physical Characteristics:** * **Chassis:** The /2 designation indicates a dual-chassis system. * **Weight:** Net weight per chassis: 193 lbs / 87.7 Kg. Shipping weight per chassis: 280 lbs / 127.3 Kg. (Multiply by number of chassis for multi-chassis systems).**End-of-Life Notice:** * The Lx Series was announced as End-of-Life (EOL) with a last buy date of June 30, 2019, and last shipments at the end of 2019. * The suggested replacement is the California Instruments Asterion series.### Why Choose Aumictech for California Instruments 12000LX/2?At Aumictech, we specialize in supplying high-end AC power source equipment. Whether you need reliable simulation of diverse AC power conditions, precise voltage and frequency control, or comprehensive measurement capabilities for demanding aerospace and defense applications, our team ensures the California Instruments 12000LX/2 delivers maximum performance for your application. We understand the critical nature of testing and compliance, and our expertise helps you leverage the full potential of this powerful instrument.