Emerson / Artesyn / Astec MP1-3V-3V-1L-30-565 1000W Power Supply

The Emerson/Artesyn/Astec MP1-3V-3V-1L-30-565 is a 1000W power supply designed for demanding industrial, telecommunications, and data processing applications. This configurable power system offers a flexible solution with multiple output modules to accommodate diverse system requirements. The MP1 series power supplies are built with a microprocessor-controlled PFC front end and are capable of accepting intelligent DC-DC converter modules, allowing for a wide range of output voltage and current combinations.

### Technical Specifications

* **Manufacturer:** Emerson / Artesyn / Astec
* **Model Number:** MP1-3V-3V-1L-30-565
* **Total Power:** 1000W (Maximum)
* **Input Voltage:** 85 – 264 VAC or 120 – 300 VDC
* **Number of Outputs:** Configurable, with up to 7 available slots for intelligent DC-DC converter modules
* **Output Voltage Range:** Modules available from 2 V to 60 V
* **Output Configurations:** Single, dual, and triple output modules can be mixed and matched
* **Module Power Ranges:** Single output modules are available in four power ranges
* **Current Share:** Available on outputs with ratings of 10 A or greater
* **Remote Sense:** Available on outputs with ratings greater than 2 A
* **Overload Protection:** Provided on all outputs
* **Voltage Adjustment:** Available on all outputs, can be manual or via I2C
* **Margining:** Available on all single output modules, typically ± 4 – 6% nominal
* **Overall Regulation:** 0.4% or 20mV maximum
* **Ripple (RMS):** 0.1% or 10mV, whichever is greater
* **Ripple (Pk-Pk):** 1.0% or 50mV, whichever is greater
* **Dynamic Response:** Less than 2% or 100 mV with a 25% load step
* **Recovery Time:** Within 1% in less than 300 µsec
* **Short-Circuit Protection:** Provided on outputs; auto-recovery upon removal of short

### Electrical Specifications

* **Input Power Factor Correction (PFC):** Microprocessor-controlled PFC front end with active inrush protection
* **Output OK Signal:** Configurable input and output OK signals and indicators
* **Global DC OK Signal:** Available
* **Inhibit/Enable:** Global and individual module inhibits/enables, configurable
* **Output Sequencing:** Configurable output UP/DOWN sequencing
* **Current Limit:** Configurable (foldback or constant current)
* **Isolated 5V Bias Voltage:** Available
* **Harmonic Distortion:** Meets EN61000-3-2 standards
* **Conducted Emissions:** Meets CISPR 22, EN55022 Curve B standards
* **Immunity:** Meets EN61000 immunity standards
* **Low Leakage Option:** Available for medical applications

### Interfaces

* **Control Connectors:** 10-position housing, gold-plated contacts (Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts, C-Grid III Series)
* **I2C Control:** Intelligent I2C control for manual or I2C voltage adjustment, monitoring of voltage, current, and temperature, and programmable voltage/current limit/inhibit/enable

### Physical Specifications

* **Chassis Material:** Aluminum with chemical film coating (conductive)
* **Dimensions:** 2.5 x 8 x 11 inches
* **Mounting:** Customer mounting on 3 sides (M4, bottom also includes #8-32 mounting holes); mounting holes on sides accept M4 screws, bottom mounting holes are #8-32
* **Cooling:** Internal DC fan or customer-provided air (option); intelligent fan with speed control and fault status
* **Weight:** Approximately 15 lbs

### Environmental Specifications

* **Operating Temperature:** -20 °C to 50 °C (derates linearly to 50% at 70 °C); -20 °C to 40 °C maximum with rear air option
* **Storage Temperature:** -40 °C to 85 °C
* **Humidity:** 95% non-condensing
* **Shock/Vibration:** Meets Mil-Hdbk 810E standards
* **Temperature Coefficient:** 0.02% per °C

### Compatibility and Certifications

* **Medical Approvals:** Full medical EN60601 approval
* **Safety Standards:** UL, CSA, TUV (EN60950/EN60601-1), BABT (EN60950/EN60601 BS7002), CB Certificate and report
* **CE Mark:** Complies with LVD
* **SEMI F47 Compliance:** Optional extended hold-up module available

Why Choose Aumictech for Emerson / Artesyn / Astec MP1-3V-3V-1L-30-565?
At Aumictech, we specialize in supplying high-end power supply equipment. Whether you need a configurable power solution, robust industrial-grade components, or reliable performance for critical systems, our team ensures the Emerson / Artesyn / Astec MP1-3V-3V-1L-30-565 delivers maximum performance for your application.