Emerson / Artesyn / Astec MP6-2V-2V-20 600W Power Supply

The Emerson / Artesyn / Astec MP6-2V-2V-20 is a 600W modular power supply designed for demanding applications requiring flexible and reliable power solutions. This power supply is part of the MP Series, which offers a configurable platform for a wide range of voltage and current requirements. Its robust design and advanced features make it suitable for industrial, telecommunications, and other critical systems.

### Technical Specifications

**General**
* **Manufacturer:** Emerson / Artesyn / Astec
* **Model:** MP6-2V-2V-20
* **Total Power:** 600W
* **Configuration:** MP6 case size (2.5 x 5 x 11 inches) with 5 available slots
* **Input Voltage Range:** 85-264 VAC; 120-350 VDC
* **Input Frequency:** 47-63 Hz (some variants support 440 Hz)
* **Input Fuse (Internal):** 15A (MP4: 10A, MP6: 15A, MP8: 20A, MP1: 20A)
* **Power Factor Correction:** Standard, meets EN61000-3-2
* **Inrush Current:** Soft start, typically 40A peak maximum
* **Efficiency:** Up to 85% at full case load
* **Holdover Storage:** 20 ms minimum (independent of input VAC) (additional 34ms with HUP module)
* **AC OK Signal:** >5 ms early warning before outputs lose regulation
* **Isolation:** Meets EN60950 (Input to output: 4000 Vac reinforced; Input to ground: 1500 Vac; Output to ground: 400 Vdc) (Medical safety to UL/cUL/EN/IEC 60601-1 3rd Edition, 2 MOOP rated)

**Output Module Configuration (MP6-2V-2V-20)**
* **Slot #1:** 42V at 7.5A (Part Number: 73-552-0048)
* **Slot #3:** 42V at 7.5A (Part Number: 73-552-0048)
* The “2V-2V” designation indicates specific voltage output modules installed in slots 1 and 3. Other configurations with different voltage/current modules are available within the MP6 series.

**Output Specifications (General for MP Series)**
* **Voltage Adjustment Range:** ±10% minimum on all outputs (full module adjustment range using I2C)
* **Margining:** ±4-6% nominal (on single output modules)
* **Overall Regulation:** 0.4% or 20mV max.
* **Ripple (RMS):** 0.1% or 10mV, whichever is greater
* **Ripple (Pk-Pk):** 1.0% or 50mV, whichever is greater (Bandwidth limited to 20 MHz)
* **Dynamic Response:** <2% or 100 mV with 25% load step * **Recovery Time:** To within 1% in <300 µsec**Protection Features** * **Overload Protection:** On all outputs (Single output modules: 122-134% for 6-60V modules; Triple output modules: no overvoltage protection) * **Short-Circuit Protection:** Standard on outputs, auto-recovery upon removal of short * **Overvoltage Protection:** Standard on single output modules (Dual output modules: 105-134% ; Triple output modules: no overvoltage protection)**Environmental** * **Operating Temperature:** -20 °C to 50 °C (starts at 0 °C) (derates linearly to 50% at 70 °C) (derates to 40°C max. with rear air option) * **Storage Temperature:** -40 °C to 85 °C * **Humidity:** 95% non-condensing * **Shock/Vibration:** Mil-Hdbk 810E**Cooling** * **Method:** Internal DC fan (field replaceable) * **Fan Fail Signal:** Included**Interfaces and Control** * **Remote Sense:** On all outputs with ratings greater than 2A * **Input-OK Signal:** Standard LED indicator * **Global DC OK Signal:** Standard LED indicator * **Global Inhibit/Enable:** TTL Logic "1" and Logic "0" (configurable) * **Individual Module Inhibit/Enable:** Available * **Current Share:** On all outputs with ratings of 10A or greater * **Voltage Adjustment:** On all outputs**Physical** * **Case Size:** MP6: 2.5 x 5 x 11 inches * **Chassis Material:** Aluminum with chemical film coating (conductive) * **Mounting:** M4 on 3 sides, 8-32 mounting holes on bottom. Max penetration 0.150” (3.8 mm). Max torque: 5 in-lbs.**Regulatory and Compliance** * **Safety Standards:** UL (UL1950), CSA (CSA22.2 No. 234 Level 5), IEC (IEC950, Class 1), VDE (EN60950), BABT (EN 60950, BS 7002), CE Mark * **EMI/EMC:** CISPR 22/EN55022 Level “B” conducted/radiated, Harmonic distortion meets EN61000-3-2 * **Immunity:** EN61000 immunity standards (Immunity - EN61000 -4, -2, -3, -4 & -5 Level 3)Why Choose Aumictech for the Emerson / Artesyn / Astec MP6-2V-2V-20 600W Power Supply? At Aumictech, we specialize in supplying high-end modular power supply equipment. Whether you need precise voltage regulation for sensitive electronics, reliable power for industrial automation, or a configurable solution to meet diverse application demands, our team ensures the Emerson / Artesyn / Astec MP6-2V-2V-20 delivers maximum performance and operational continuity for your critical systems.