Vytran PTR-200 ARL 500um Fiber Recoater

The Vytran PTR-200 ARL 500µm Fiber Recoater is an automated system for applying UV-curable protective buffer coatings to optical fibers with integrated linear proof testing. The ARL module combines automatic recoating and linear proof test capability, using split quartz mold plates with anti-flash coatings and a volumetric pump for precise material dispensal. A pneumatic gripper assembly automates mold plate operation, enabling high-volume production workflows. The system applies recoat material in a circular cavity around the fiber, then cures using ultraviolet light.

– Technical Specifications

• Fiber Diameter Compatibility: 500µm nominal (custom sizes from 200µm available)
• Recoat Material: UV-curable acrylate materials
• Recoat Diameter: 260µm and 280µm standard sizes; custom diameters available
• Maximum Recoat Length: 2 inches (50 mm)
• Curing Method: Ultraviolet (UV) light
• Dispensing System: Volumetric pump with precision material injection
• Mold Plates: Split quartz with optical coatings for flash prevention

Integrated Linear Proof Tester Specifications:

• Load Application: Linear Fiber Clamp
• Maximum Load: 4.5 lbs (2.1 kg)
• Proof Stress: 235 kpsi (1.6 GPa) for 125 µm fiber
• Load Accuracy: ±2%
• Ramp Rate: Programmable up to 5 lbs/s (2.3 kg/s)
• Hold Time: Programmable
• Display Units: lbs, kg, N, kpsi, GPa

– Key Features

• Fully automated mold assembly and recoat injection for production efficiency
• Pneumatic gripper system (80–120 psi dry compressed air)
• Integrated load cell-based proof testing eliminates secondary processing
• Programmable cure parameters and load profiles
• RS-232 serial communication for system control and data logging

– Electrical & Physical

• Base Module Power: 12.5 VDC, 13 A (external supply)
• Control Panel Power: 12.5 VDC, 500 mA
• External Power Supply: 100–120 / 200–240 VAC, 4.5 / 2.2 A, 47–63 Hz
• Dimensions: H 5.0″ (127 mm), W 10.25″ (260 mm), D 5.0″ (127 mm)

– Compatibility & Integration

The PTR-200 ARL operates as a standalone module or integrates into multi-station fiber processing lines. Polyimide recoating requires the PTR-200-PRL variant. Extended recoat lengths up to 100 mm are available through alternative PTR-200 configurations.