HP / Agilent 6690A 6600-Watt System Power Supply, 15V, 440A

The HP/Agilent 6690A is a 6600 W system DC power supply engineered for high-power manufacturing test and burn-in applications. It delivers 0 to 15 V at 0 to 440 A with exceptional output stability, low ripple and noise, and fast programming across voltage and current ranges. Equipped with GPIB and analog interfaces, this supply supports both automated test systems and custom waveform generation while maintaining ±0.04% voltage programming accuracy and ±0.1% current programming accuracy at 25 ±5°C.

– Technical Specifications

• Output: 0 to 15 V, 0 to 440 A, 6600 W
• Voltage Programming Accuracy: ±0.04% + 15 mV (at 25 ±5°C)
• Current Programming Accuracy: ±0.1% + 230 mA (at 25 ±5°C)
• Voltage Readback Accuracy: ±0.05% + 22.5 mV (front panel/GPIB @ 25 ±5°C)
• Output Ripple & Noise (20 Hz to 20 MHz): 2.5 mV RMS, 15 mV peak-to-peak
• Load Regulation (Voltage): ±0.002% + 650 µV
• Line Regulation (Voltage): ±0.002% + 650 µV
• Input Power: 9000 VA maximum, 7950 W maximum, 175 W no-load
• AC Input: Three-phase 180 to 235 VAC (36 Arms max, 28 Arms nominal) or 360 to 440 VAC (18 Arms max, 14 Arms nominal), 47 to 63 Hz
• Dimensions: 425.5 mm W × 221.5 mm H × 674.7 mm D

– Key Features

• Fast up-and-down programming with high current readback accuracy
• GPIB interface with SCPI command support for integrated test environments
• Analog programming (0 to –5 V voltage, 0 to +5 V current; 30 kΩ input impedance) and monitoring for custom process control
• Full overcurrent, overvoltage, and overtemperature protection
• Programmable shutdown, external TTL shutdown input, and linked supply shutdown
• Remote sense capability and electronic calibration
• Fan-speed control for reduced acoustic noise
• Parallel operation: up to three 6690A units connectable for increased current capacity
• Front-panel manual control with error status reporting

– Typical Applications

• Manufacturing test and validation of high-power systems
• Long-term device burn-in
• Custom waveform generation via analog interface
• Multi-supply systems requiring synchronized shutdown and current scaling

– Compatibility & Integration

Physical size matches the 6680 Series (5000 W), enabling system power upgrades without additional rack space. Standard GPIB and analog interfaces support integration into automated test platforms.