Trusted by Labs, Manufacturers, and R&D Centers Worldwide
Get a quote today Here
Introduction: Why Optical Calibration Is Non-Negotiable
In the world of fiber optics, laser systems, and photonic instrumentation, even the smallest miscalibration can lead to cascading failures. Whether you’re aligning DWDM filters, verifying a tunable laser, testing power meters, or deploying high-speed optical networks — calibrated accuracy is mission-critical.
At Aumictech, we specialize in high-precision optical calibration services backed by NIST-traceable standards, advanced diagnostic tools, and a reputation for engineering-grade excellence. From spectrum analyzers to optical power meters, tunable lasers to wavelength meters — our lab in Downingtown, Pennsylvania serves clients across the U.S. and internationally, delivering fast, accurate, and affordable calibration solutions.
What Makes Aumictech the Best Optical Calibration Lab?
Not all calibration services are equal. Many companies offer “verification” only, some outsource to OEMs with long lead times, and others use uncertified tools that don’t meet industry standards. Aumictech is different.
Here’s what sets us apart:
1. NIST-Traceable Standards & Reports
Every calibration we perform is traceable to the National Institute of Standards and Technology (NIST) and includes formal certification and test reports.
2. Broad Equipment Support
We calibrate RF and optical equipment from all major brands, including Agilent, Yokogawa, Keysight, Anritsu, Fujikura, Ando, EXFO, Viavi, Fitel, HighFinesse, and more.
3. In-House Optical Sources
We use calibrated reference lasers and broadband sources (1310 nm, 1490 nm, 1550 nm, 1625 nm, and visible) to test and align with high accuracy.
4. Fast Turnaround (3–5 Days Standard)
Unlike OEMs that take 3–6 weeks, we typically complete calibrations within 3–5 business days, with expedited options available.
5. Cost-Effective, Flat-Rate Pricing
No hidden fees, no per-parameter billing — we offer affordable flat-rate services with volume discounts and annual contracts.
6. Experienced Engineers, Not Just Technicians
Our team includes optical engineers and metrology professionals with deep knowledge of photonics instrumentation and laser systems.
7. Repair + Calibration Under One Roof
If your unit is out of spec due to a malfunction, we can repair and recalibrate it in the same cycle — saving you time and money.
Optical Equipment We Calibrate
We provide calibration services for a wide variety of optical instruments used in labs, telecom, aerospace, R&D, and manufacturing.
Optical Spectrum Analyzers (OSA)
- Yokogawa AQ6370 Series (A/B/C/D/E)
- Ando AQ6317B, AQ6319, AQ6331
- Anritsu MS9740A
- Agilent/Keysight 86140B, 86142B, 86146B
- Calibration includes: wavelength accuracy, dynamic range, resolution bandwidth, and power linearity.
Optical Power Meters
- EXFO FPM Series, EPM-50/70
- Agilent 8153A, 8163B, 81634B, 81635A
- Viavi/JDSU SmartClass, OLTS Series
- Includes absolute power verification and wavelength-dependent calibration at multiple test points.
Tunable Laser Sources
- Agilent 81600B, 81640A, 81680A, 81989A
- Yokogawa AQ8201, AQ4280
- Wavelength accuracy, step size, output power, and stability checked across tuning range.
Wavelength Meters
- HighFinesse WS-6, WS-7, WS-Ultimate
- Bristol 871/671 Series
- Verified using certified reference lasers with traceable peak alignment across ITU grid.
Fusion Splicers (PM & SM)
- Fujikura FSM-100P, 45PM, 70S
- Fitel S185PM, INNO View Series
- Axis alignment, core/cladding matching, arc power, and loss test using reference fibers.
Fiber Inspection & Cleave Tools
- Fiberscopes, interferometers, and cleavers
- Verification of fiber angle precision, endface quality, and camera alignment.
Our Calibration Methodology
We don’t just “check” — we measure, validate, and correct using precision-grade instruments. Here’s how we do it:
Step 1: Pre-Calibration Assessment
- Visual inspection
- Functional checks
- Internal self-test logs (when applicable)
- Review of calibration history and OEM requirements
Step 2: Calibration Procedure
- Use of NIST-traceable lasers and references
- Multi-point measurements at key telecom wavelengths
- Temperature-controlled bench setups
- Real-time monitoring of drift, repeatability, and power offset
Step 3: Post-Calibration Validation
- Cross-verification with redundant standards
- Comparison against factory specs and published tolerances
- Generation of detailed calibration certificate with date, serial, pass/fail notes, and technician ID
Industries We Serve
| Industry | Applications |
|---|---|
| Telecommunications | DWDM, passive/active component testing, fiber certification |
| Aerospace & Defense | Secure fiber links, sensor networks, LiDAR |
| R&D and Universities | Quantum optics, ultrafast lasers, nonlinear optics |
| Medical & BioOptics | Endoscopy, OCT systems, surgical laser calibration |
| Laser Manufacturing | QC testing, tunable laser tuning, power measurement |
| Semiconductor & Chip Fab | Photonic chip testing, silicon photonics metrology |
Aumictech vs. Other Labs
| Feature | Aumictech | OEM | Generic Calibration Shops |
|---|---|---|---|
| NIST Traceability | ✅ Yes | ✅ Yes | ⚠️ Sometimes |
| Repair + Calibration | ✅ Yes | ❌ Separate | ❌ Limited |
| Turnaround Time | 3–5 Days | 3–6 Weeks | 1–2 Weeks |
| Cost | Affordable | High | Variable |
| Custom Reporting | ✅ Yes | ❌ Minimal | ⚠️ Basic |
| Multi-Brand Support | ✅ All | ❌ Own Brand Only | ⚠️ Limited |
| Optical Specialization | ✅ Core Focus | ❌ Not Primary | ❌ Often Electrical-Only |
Additional Services Available
- Preventative maintenance & cleaning
- Annual calibration contract (with reminders)
- Pickup/drop-off for PA, NJ, NY clients
- Used equipment certification (for resellers or eBay buyers)
- Custom test bench setup with validation
- Data logging & automation integration support
- Trade-in or buyback options for legacy optical gear
Testimonials from Our Clients
“We’ve used Aumictech for calibrating all of our AQ6370 and EXFO power meters. Their turnaround and service quality are unbeatable.”
— Network Test Engineer, Chicago
“They helped us pass ISO 17025 audits by providing solid documentation and traceability on our Agilent laser calibration gear.”
— Metrology Manager, Optical Component Manufacturer
“Aumictech handled our Fujikura 100PM, Yokogawa OSA, and Fitel cleavers — all came back in spec and looking brand new.”
— R&D Lab Director, Boston University
Request a Free Calibration Quote
Have equipment due for calibration or not reading accurately?
We’ll send you a quote, RMA form, and shipping instructions — or schedule a local pickup if you’re in our service zone.
Contact Information:
Email: sales@aumictech.com
Website: www.aumictech.com
Final Thoughts
Optical calibration is not a luxury — it’s a requirement for credibility, safety, and performance. If your equipment isn’t properly calibrated, your data isn’t reliable. At Aumictech, we take pride in being the calibration lab of choice for optics professionals who depend on precision.
Whether you run a fiber optics lab, manage a production floor, or oversee laser development, you can count on us to keep your tools accurate, compliant, and ready for innovation.
