Aeroflex 6204B Microwave Test Set

The Aeroflex 6204B Microwave Test Set is a portable, integrated instrument that combines scalar network analysis, power measurement, and frequency assessment into a single platform. Operating from 10 MHz to 46 GHz, it delivers precision measurements across components, assemblies, and transmission line systems for both development and field deployment.

– Technical Specifications

Measurement Range & Accuracy
• Frequency range: 10 MHz to 46 GHz
• Fault location accuracy: 0.1%
• Distance measurement accuracy: 0.1% of range or 3 mm (whichever is larger), single faults up to 1 km
• Minimum distance resolution: 1.82 cm at Vr=1
• AC detection dynamic range: 80 dB
• DC detection dynamic range: 70 dB

Signal Source & Power Delivery
• Synthesized CW or sweep-capable signal source with optional step attenuator
• Power output (leveled): -80 dBm minimum (Option 001, 70 dB attenuator) or -100 dBm minimum (Option 009, 90 dB attenuator)
• Sweep points: user-selectable, 2 to 1601
• Sweep time: 40 ms to 500 s settable range
• Measurement times: <200 ms for 401 points; <800 ms for 1601 points

Power Supply Outputs
• Voltage output: -15 V to +15 V, 1 mV resolution, ±15 mV accuracy (2.5 W maximum)
• Current output: -150 mA to +150 mA, 10 µA resolution, ±300 µA accuracy (1.25 W maximum)

Display & Storage
• Dual-channel simultaneous measurement display
• 3.5-inch floppy disk drive for data storage

– Key Features

• Integrated 6210 Reflection Analyzer for reflection coefficient and time-domain measurements
• Return loss and VSWR analysis on coaxial or waveguide transmission lines
• Dynamic calibrator with EEPROM-corrected detectors
• Integral frequency counter and power meter
• Frequency proportional voltage output (1 V/GHz or 0.5 V/GHz selectable, 20 V maximum, ±15 mV linearity)
• Power meter sensor accepts detector signals or 0 to ±1 V analog meter output

– Typical Applications

Component and assembly characterization, transmission line fault diagnosis, RF signal source functions, and power analysis across microwave and millimeter-wave frequencies.

– Compatibility & Integration

Rear panel BNC input accommodates power meter and auxiliary signal connectivity. Field-replaceable RF output connector options available.