Agilent / Keysight 85039A Calibration Kit, Type-F

The Agilent/Keysight 85039A is a Type-F calibration kit engineered for precision calibration of 75-ohm RF and microwave test equipment. It delivers traceable calibration standards and adapters across DC to 3 GHz, enabling accurate S-parameter measurements and network analyzer validation on systems equipped with Type-F interfaces.

– Technical Specifications

• Frequency Range: DC to 3 GHz
• Impedance: 75 ohms
• Connector Type: Type-F male standards
• Operating Temperature: +15 to +35°C
• Storage Temperature: −40 to +75°C

– Key Features

The kit comprises three primary calibration standards. The Type-F Male Open standard exhibits phase deviation of ±0.55° from DC to 1 GHz and ±1.30° from 1 GHz to 3 GHz. The Type-F Male Short standard provides phase deviation of ±0.60° from DC to 1 GHz and ±1.00° from 1 GHz to 3 GHz. The Type-F Male Load delivers return loss exceeding 32 dB (ρ ≤ 0.025) from 1.3 GHz to 3 GHz, with return loss ≥ 45 dB (ρ ≤ 0.006) from DC to 1 GHz and ≥ 38 dB (ρ ≤ 0.013) from 1 GHz to 3 GHz.

Included adapters extend system flexibility. Type-N to Type-F adapters provide return loss ≥ 38 dB (ρ ≤ 0.013) from DC to 1 GHz and > 26 dB (ρ < 0.050) from 1.3 GHz to 3 GHz. Type-F to Type-F female adapters specify return loss ≥ 40 dB (ρ ≤ 0.013) from DC to 1 GHz and ≥ 32 dB (ρ ≤ 0.025) from 1 GHz to 3 GHz.

– Typical Applications

Calibration of network analyzer systems and 75-ohm test equipment. S-parameter measurement validation across RF and microwave frequency bands.

– Compatibility & Integration

Designed for Keysight 8752C, 8753 Series (8753A, 8753B, 8753C, 8753D), 75-ohm test sets, and Agilent 8712E Network Analyzer Systems. Connectors comply with SCTE specifications; center conductor dimensions range from 0.56 to 1.07 mm (0.022 to 0.042 inches). ESD precautions required during handling.