Agilent/Keysight E3614A

The Agilent/Keysight E3614A is a 48 W single-output DC power supply engineered for benchtop research, development, and service applications. It delivers stable, precise voltage and current with low noise and excellent regulation across its 0–8 V, 0–6 A output range. The unit operates in both constant voltage (CV) and constant current (CC) modes, with adjustable current limiting and front-panel overvoltage protection to safeguard connected devices.

– Technical Specifications

Output Performance
• Voltage: 0 to 8 V DC
• Current: 0 to 6 A
• Maximum Power: 48 W
• Load Regulation: 0.01% + 2 mV
• Line Regulation: 0.01% + 2 mV
• Ripple and Noise (20 Hz to 20 MHz, CV mode): 200 µV RMS, 1 mV peak-to-peak
• Meter Resolution: 10 mV (voltage), 10 mA (current)

Programming and Control
• Remote analog voltage programming: 0 to 10 V input for zero to maximum output
• Programming Linearity: 0.5% (voltage and current)
• Programming inputs protected against ±40 V transients
• Adjustable current limit prevents unwanted output shorts
• Adjustable overvoltage protection via front panel

Environmental
• Operating Temperature: 0 to 40 °C (full rated output); output current derated 1% per °C between 40 °C and 55 °C
• Cooling: Convection
• Dimensions: 212.3 mm W × 88.1 mm H × 318.4 mm D
• Weight: 3.8 kg (8.4 lbs) net

– Key Features

• Dual-mode operation (CV/CC) for flexible circuit testing
• Low-noise output suitable for sensitive analog and RF applications
• Analog programming interface for automated test systems
• Protected programming inputs withstand ±40 V overvoltage
• Compact benchtop form factor with convection cooling—no forced-air requirements

– Typical Applications

Device characterization, circuit debugging, component burn-in testing, and prototype validation requiring stable, low-noise DC power at moderate voltage and current levels.

– Compatibility & Integration

Member of the Agilent/Keysight E3600 series DC power supply family. Optional rack-mounting kits enable side-by-side or shelf configurations. AC input: 100 Vac ±10%, 47–63 Hz (option 0E9); three-conductor grounded power cable required.