Agilent/Keysight MSOX3012T

The Keysight MSOX3012T is a 100 MHz mixed-signal oscilloscope combining 2 analog channels and 16 digital channels for comprehensive signal analysis. Built on the InfiniiVision 3000T X-Series platform, it delivers a 1,000,000 waveforms/sec update rate powered by MegaZoom IV smart memory ASIC architecture. The instrument functions as a 6-in-1 solution: oscilloscope, logic analyzer, serial protocol analyzer (optional), digital voltmeter, arbitrary waveform generator (optional), and 8-digit counter/totalizer. An 8.5-inch capacitive touch screen with gesture support and Zone Touch Triggering—an industry-exclusive feature for isolating signals by drawing areas—streamlines complex measurements and reduces analysis time.

– Technical Specifications

• Bandwidth: 100 MHz (upgradeable)
• Analog Channels: 2
• Digital Channels: 16 (included with logic probe)
• Maximum Sampling Rate: 5 GSa/s per channel (2 analog active); 2.5 GSa/s (all channels active)
• Memory Depth: 4 Mpts standard (2 Mpts with all channels active)
• Rise Time: 3.5 ns
• Vertical Resolution: 8 bits (12 bits in High-Resolution Acquisition Mode)
• Vertical Range: 1 mV/div to full bandwidth
• Waveform Update Rate: 1,000,000 waveforms/sec

– Key Features

Triggering & Acquisition
• Edge, Pulse Width, Pattern, Runt, Setup & Hold, Video, USB, Nth Edge Burst, OR, Rise/Fall Time triggering
• Zone Touch Triggering for intuitive signal isolation
• Normal, Peak Detect, Averaging, and High-Resolution acquisition modes
• Segmented Memory standard

Integrated Instruments
• Mixed-signal analysis: time-correlated 2 analog + 16 digital channels (20 total)
• 8-digit Counter/Totalizer
• Arbitrary Waveform Generator (optional, 20 MHz): sine, square, ramp, pulse, DC, Sinc(x), exponential, cardiac, Gaussian, noise; AM/FM/FSK modulation
• Serial Protocol Analysis (optional): I2C, SPI, RS232/422/485/UART, CAN, CAN FD, LIN, SENT, CXPI, FlexRay, MIL-STD 1553, ARINC 429, USB PD, I2S; dual-bus simultaneous decode
• Digital Voltmeter (optional, 3-digit)

Advanced Analysis
• Math functions: Differentiate, Integrate, FFT Magnitude/Phase, Square Root, Ax+B, Square, Absolute Value, Common/Natural Logarithm, Exponential, Base 10 Exponential

– Display

• 8.5-inch capacitive touch screen with gesture support

– Typical Applications

Mixed-signal embedded system debugging, digital protocol validation, analog circuit characterization, and serial bus analysis in automotive, industrial, and consumer electronics development.