Agilent / Keysight N5193A UXG X-Series Agile Signal Generator

The Keysight N5193A UXG X-Series Agile Signal Generator is a high-performance signal source engineered for aerospace, defense, and wireless communications testing. It delivers rapid frequency, amplitude, and phase switching across 10 MHz to 20 GHz (Option 520) or 10 MHz to 40 GHz (Option 540), enabling real-time simulation of complex radar, electronic warfare, and communication signal environments. The instrument supports phase-continuous and phase-coherent switching modes to minimize spectral splatter and maintain phase trajectory consistency during rapid transitions.

– Technical Specifications

Frequency and Switching
• Frequency range: 10 MHz to 20 GHz (Option 520); 10 MHz to 40 GHz (Option 540)
• CW frequency resolution: 10 kHz standard; 0.001 Hz with Option FR1
• Frequency switching speed: 100 µs
• Phase offset adjustment: 0.1° increments (nominal)
• Dual frequency band modes (A/B) optimize for low harmonics or extended low-frequency bandwidth

Frequency Reference
• Internal timebase: ±5 × 10⁻⁸ initial accuracy; ±3 × 10⁻⁸/year aging; ±4.5 × 10⁻⁹ (nominal) temperature coefficient 0–55 °C
• External 10 MHz input: ±1.0 ppm lock range (nominal); 6 dBm ± 6 dB input amplitude; 50 Ω impedance
• Reference output: Selectable 10 MHz or 100 MHz; 7 dBm (nominal) into 50 Ω

Amplitude and Noise
• Amplitude range: +10 dBm to –10 dBm
• Phase noise: –117 dBc/Hz (typical) at 20 kHz offset, 10 GHz carrier
• Enhanced phase noise available (Option EP1)

– Key Features

• Phase-continuous switching minimizes spectral splatter within frequency bands
• Phase-coherent switching maintains repeatable phase relationships for sequential frequency visits
• Dual-mode frequency bands support narrowband precision or wideband chirp and FM applications
• Electronic Frequency Control (EFC) enables dynamic frequency modulation at –0.04 ppm/V sensitivity
• System sync and 6 GHz input/output interfaces for external timing and reference integration

– Typical Applications

• Radar system validation and electronic warfare signal simulation
• Advanced modulation scheme testing in communication systems
• Complex signal environment reproduction for receiver qualification
• Early-stage validation of frequency-agile and phase-coherent systems

– Compatibility & Integration

The N5193A supports external 10 MHz frequency references and provides system sync I/O for multi-instrument coordination. Reference outputs (10/100 MHz) enable clock distribution to dependent test systems.