Anritsu MP1776A Error Detector – 4-Channel, 12.5 Gbps 4 X MU177601B

The Anritsu MP1776A is a 4-channel error detector for high-speed digital communication system testing. It performs simultaneous or independent Bit Error Rate (BER) measurements across channels at rates from 100 Mbps to 12.5 Gbps per channel, scaling to 50 Gbps in 4-channel combined mode. The mainframe accommodates four MU177601B 12.5 Gbps Error Detector Units in flexible single-channel, 2-channel combined, and 4-channel combined configurations. This architecture supports testing of multiplexing and de-multiplexing units across research, development, and manufacturing environments for 40 Gbps transmission equipment.

– Technical Specifications

Clock Frequency Measurement:
• 100 MHz to 12.5 GHz (independent mode)
• 0.2 to 25 GHz (2-channel combined)
• 0.4 to 50 GHz (4-channel combined)
• Resolution: 1 kHz
• Accuracy: 10 ppm ±1 kHz

Error Measurement Ranges:
• Error Ratio: 0.0000 × 10⁻¹⁶ to 1.0000 × 10⁰
• Error Count: 0 to 9,999,999; 1.0000 × 10⁷ to 9.9999 × 10¹⁶

Data Patterns:
• PRBS: 2ⁿ – 1 (n = 7, 9, 11, 15, 20, 23, 31)
• Zero Substitution: 2ⁿ (n = 7, 9, 11, 15) with consecutive zero insertion up to pattern length – 1
• Programmable patterns: 2 to 8,388,608 bits (independent); 4 to 16,777,216 bits (2-channel); 8 to 33,554,432 bits (4-channel)
• Maximum 32 Mbit programmable pattern at 4-channel combined mode
• Internal pattern memory: 8 Mbits per Error Detector Unit
• Logic Inversion: Positive/negative switching

Synchronization & Detection:
• Synchronization Methods: Normal, Frame
• Error Detection Modes: Insertion, Omission, Total
• Burst Data BER measurement supported for optical circulating loop tests

– Key Features

• Graphical User Interface with large color LCD, touch screen, mouse, rotary encoder, and front panel keys
• Remote control via SCPI commands over GPIB or parallel interface
• Internal pattern editor; optional MX177601A SDH/SONET Pattern Editor software
• NRZ input waveform

– Typical Applications

• High-speed transmission equipment development and validation
• Multiplexer and de-multiplexer unit testing
• Manufacturing test and quality assurance for 40 Gbps systems

– Compatibility & Integration

• Configuration: 4 × MU177601B 12.5 Gbps Error Detector Units
• Compliance: LVD EN61010-1: 1993/A2, 1995 (Installation Category II, Pollution Degree 2)
• Product Status: Discontinued July 2006