Anritsu MU100010A – Multirate Module, 10G For MT1000A Series Network Master Pro

The Anritsu MU100010A is a multirate transport module for the MT1000A Series Network Master Pro, enabling installation and maintenance testing across diverse communication networks from 1.5 Mbps to 10 Gbps. This module delivers comprehensive protocol support including Ethernet, OTN, Fibre Channel, eCPRI, SDH/SONET, and MPLS-TP, making it essential for mobile fronthaul and backhaul, carrier access, and metro and core network commissioning. Two ports operate simultaneously across all supported rates and interfaces.

## Technical Specifications

• **Speed Range:** 1.5 Mbps to 10 Gbps
• **Supported Protocols:** Ethernet (up to 100 Gbps), OTN (up to OTU4 with multistage mapping and ODU Flex), Fibre Channel (up to 16 Gbps), eCPRI/RoE/CPRI/OBSAI, SDH/SONET, PDH/DSn, Synchronous Ethernet (SyncE), PTP (IEEE 1588 v2), MPLS-TP and PBB (up to 10 Gbps)
• **Physical Interfaces:** 2 × RJ48, 2 × BNC Tx/Rx, 2 × Bantam Tx/Rx, 2 × RJ45, 2 × SFP+

## Key Features

• BER testing including CPRI/OBSAI interface, frame loss, and sequence error detection
• RFC 2544 and Y.1564 Ethernet performance testing; RFC 6349 TCP throughput validation
• Ethernet OAM support up to 100 Gbps with traffic generation at full line rate
• Error and alarm detection, return delay time measurement, and link status monitoring
• Frame capture and simultaneous bidirectional monitoring with IP channel statistics
• OTN testing with client signals; eCPRI/IEEE1914.3 frame and latency testing
• CPRI/OBSAI L1 and L2 layer testing
• Service disruption measurements and Storage Area Networking (SAN) testing capability

## Typical Applications

• Mobile fronthaul and backhaul commissioning and inspection
• Carrier access network deployment and troubleshooting
• Metro and core network commissioning and maintenance
• Multiprotocol transport validation across heterogeneous network environments

## Compatibility & Integration

• **Host Platform:** MT1000A Series Network Master Pro mainframe
• **Display:** 9-inch (800 × 480 pixels) enhanced display with intuitive three-window GUI (SETUP, TEST, RESULTS)
• **Operating System:** Linux with fast boot and stable operation
• **Remote Operation:** Full multi-user remote access via MX100001A Software
• **Configuration:** Requires protocol option(s) to enable specific test functionality