BCP/JDSU Uniphase 320A Optical Laser O-E Receiver

The BCP/JDSU Uniphase 320A is an optical-to-electrical receiver that converts low-level optical signals into high-gain electrical outputs for fiber optic communications and test applications. Built around an InGaAs APD detector, it delivers minimum 2000 V/W conversion gain across a DC to 2.5 GHz bandwidth, with typical performance reaching 3.0 GHz and 2500 V/W. The receiver detects signals as low as 100 nW (-40 dBm) and handles high-power inputs up to 1.0 mW (0 dBm) without overload, making it ideal for transmitter waveform analysis and error rate testing on high-speed digital signals.

– Technical Specifications

• Bandwidth: DC to minimum 2.5 GHz (typical 3.0 GHz)
• Conversion Gain: Minimum 2000 V/W, typical 2500 V/W
• Detector: InGaAs APD
• Wavelength Range: 1200 to 1600 nm
• Optical Input Range: 100 nW (-40 dBm) minimum to 1.0 mW (0 dBm) maximum
• Input Return Loss: Minimum 30 dB at 1310/1550 nm
• DC Output Offset: <±100 µV after automatic nulling
• Optical Connector: Diamond universal screw-on adapter, 9/125 µm single-mode fiber
• Electrical Output: Female SMA
• Power Supply: 100–240 VAC, 50–60 Hz; maximum 25 W consumption
• Dimensions: 10.13" W × 4.54" H × 10.39" D (25.7 × 11.5 × 26.4 cm)
• Weight: 6 lbs (2.7 kg)
• Operating Temperature: 10°C to 40°C
• Storage Temperature: -20°C to 70°C
• Humidity: 95% RH non-condensing (10°C to 40°C)

– Key Features

• Automatic DC offset nulling when no optical signal is present
• High sensitivity: detectable down to -40 dBm
• Wide dynamic range accommodates both low-power and high-power inputs
• Optimized for single-mode fiber coupling and standard telecom wavelengths

– Typical Applications

• Transmitter waveform analysis
• Error rate testing
• High-speed optical signal detection and measurement

– Compatibility & Integration

The 320A accepts standard 9/125 µm single-mode fiber via its Diamond universal screw-on connector. Electrical output routes through SMA female connectors to measurement instruments. The unit operates from standard laboratory AC power with low thermal load.