Bustec ProDAQ 3020-AB USB 2.0 VXI Slot-0 Interface

The Bustec ProDAQ 3020-AB USB 2.0 Slot-0 Interface is a C-size, register-based VXIbus module that establishes a direct, high-speed communication link between a host computer’s USB 2.0 port and a VXIbus backplane. This interface is designed to function as a Slot-0 controller, enabling seamless data acquisition and control for ProDAQ LXI and PXI systems. It offers automatic detection of its Slot-0 status within a VXI mainframe, adapting its capabilities accordingly. The ProDAQ 3020-AB specifically includes an integrated GPIB port, allowing for the control of GPIB devices within the test system via the USB connection. It is compatible with Pentium-based PC systems equipped with USB 1.1 or USB 2.0 host controllers, with USB 2.0 recommended for full performance. The interface supports hot-plugging and hot-swapping of USB devices.

### Technical Specifications

**General Interface:**
* **Model:** Bustec ProDAQ 3020-AB
* **Type:** USB 2.0 Slot-0 Interface
* **VXIbus Module Size:** C-size
* **Device Type:** Register-based VXIbus module
* **Slot-0 Capabilities:** Automatic detection of Slot-0 operation with support for MODID and CLK10 when in Slot-0.
* **Host Computer Requirements:** Pentium-based PC compatible computer with USB 1.1 or USB 2.0 host controller. USB 2.0 host controller required for maximum performance.
* **Hot Plug-in/Swap:** Supported.

**Interfaces:**
* **Host Interface:** USB 2.0 (High-speed compliant, up to 480 Mbps)
* **VXIbus Interface:**
* **Address Ranges:** A16, A24, A32
* **Data Transfer Modes:** D08, D16, D16BLT, D32, D32BLT, D64MBLT
* **Interrupt Capability:** Interrupter/Handler, IRQ 1-7
* **Trigger Lines:** VXIbus TTL Trigger 0-7, VXIbus ECL Trigger 0-1
* **Optional Interfaces:**
* **GPIB Port:** IEEE 488.2 standard, integrated Ines iGPIB 72010 (NEC7210C/TMS9914A compatible) controller.

**Data Throughput:**
* **Maximum Throughput:** Up to 38 MB/s (with Tundra Universe Slave/D64MBLT Protocol).

**Front Panel I/O:**
* **Trigger Input:** TTL level, active edge software selectable. Can be routed to VXIbus TTL and ECL trigger lines.
* **Trigger Output:** TTL level, active level software selectable. Can be driven by VXIbus TTL and ECL trigger lines.
* **CLK10 I/O:** TTL level.
* **GPIB Port Connector:** Standard 24-pin IEEE 488 connector (for -AB model).

**Power Requirements:**
* **Voltage:**
* +5V: 900 mA typical, 1400 mA maximum
* -5.2V: 300 mA maximum
* -2V: 300 mA maximum
* **Power Consumption:** < 9.2 W**Physical Characteristics:** * **Dimensions:** VXIbus single slot C-size module. * **Weight:** 950 g**Environmental:** * **Operating Temperature:** 0°C to +50°C * **Storage Temperature:** -40°C to +70°C * **Humidity:** 10% to 90% (non-condensing)**Software Support:** * **Compatibility:** VXIplug&play compatible VISA library. * **Operating Systems:** Microsoft Windows (32-bit, 64-bit), VxWorks, and Linux. (Contact Bustec Ltd. for specific Linux driver information). * **Drivers:** VXIplug&play driver revision 4.3.1 for Windows 32/64-bit systems is available.**Compatibility Notes:** * Does not extend the VXI backplane between mainframes in a multi-mainframe system. * If used as a slot-0 controller in a D-size mainframe, it cannot provide control for instruments using the additional features of the P3 connector (CLK100, Star Trigger, add. Trigger and Local Bus Lines) as it is a C-size module.### Why Choose Aumictech for Bustec ProDAQ 3020-AB USB 2.0 Slot-0 Interface? At Aumictech, we specialize in supplying high-end data acquisition and test equipment. Whether you need seamless PC to VXIbus integration, enhanced data throughput for complex applications, or the convenience of a built-in GPIB interface, our team ensures the Bustec ProDAQ 3020-AB USB 2.0 Slot-0 Interface delivers maximum performance and reliability for your engineering and procurement needs.