Cirris PW300 Power Supply for Cable Analyzers

The Cirris Systems PW300 is a power supply unit designed to provide the necessary electrical power for the Cirris 1100R+ and 1100H+ cable testers. This unit is essential for the proper operation of these testing instruments, ensuring they can perform their functions of electrical continuity, insulation resistance, and dielectric breakdown testing. The PW300 is compatible with a range of input voltages, accommodating international power standards.

### Technical Specifications

**Power Input:**
* Input Voltage: 100-250 VAC
* Frequency: 47-63 Hz or 50-60 Hz
* Power Consumption: Maximum 50 Watts

**Compatibility:**
* Designed for use with Cirris Systems 1100R+ and 1100H+ cable testers.

**Physical Characteristics:**
* While specific dimensions and weight for the PW300 power supply are not detailed in the provided search results, the compatible testers (1100R+ and 1100H+) have dimensions in the range of approximately 14.5″ x 6.75″ x 2.5″ to 14.25” x 6.75” x 5.25”.

### Electrical Characteristics

* The PW300 serves to regulate and supply the appropriate voltage and current required by the 1100R+ and 1100H+ testers for their various testing functions.

### Compatibility

**Primary Device Compatibility:**
* Cirris Systems 1100R+ Low Voltage Tester
* Cirris Systems 1100H+ Cable Analyzer

**Note:** The 1100R+ and 1100H+ testers are noted as being obsolete or replaced by newer models (4200 and 4250 respectively) in some sources, however, support may still be available.

### Electrical Specifications of Compatible Testers

The PW300 power supply supports the following electrical testing capabilities when used with the respective testers:

**Cirris Systems 1100R+ Low Voltage Tester:**
* **Low Voltage Test (2-Wire):**
* Voltage: 4 V max
* Current: 3 μA to 6 mA
* Resistance: 0.1 Ω to 1 MΩ ±1% ±0.1 Ω, 5 MΩ ±10%
* **Low Voltage Test (4-Wire):**
* Voltage: 4 V max
* Current: 1 mA to 1 A
* Resistance: 0.005 Ω to 10 Ω ±2% ±0.005 Ω
* **Component Tests:**
* Diodes: Silicon, LEDs, zeners with breakdown > 4 V
* Resistors: 0.1 Ω to 100 kΩ ±1% ±0.1 Ω, 100 kΩ to 5 MΩ ±10%
* Capacitors: 5 nF to 100 μF ±10% ±0.02 nF

**Cirris Systems 1100H+ Cable Analyzer:**
* **Low Voltage Test (2-Wire):**
* Voltage: 4 V max
* Current: 3 μA to 6 mA
* Resistance: 0.1 Ω to 100 kΩ ±1% ±0.1 Ω, 100 kΩ to 5 MΩ ±10%
* **Low Voltage Test (4-Wire):**
* Voltage: 4 V max
* Current: 1 mA to 1 A
* Resistance: 0.001 Ω to 10 Ω ±2% ±0.001 Ω
* **High Voltage Test (Dielectric Withstand):**
* Voltage: 50 to 1500 VDC ±5% ±5 V (2000 VDC optional), 50 to 1000 VAC optional
* Current Limit: 0.1 mA to 1.5 mA
* HV Energy Limit: 35 mJ
* HV Charge Limit: 45 μC
* **Component Tests:**
* Diodes: Silicon, LEDs, zeners with breakdown < 4 V * Resistors: 0.1 Ω to 100 kΩ ±1% ±0.1 Ω, 100 kΩ to 5 MΩ ±10% * Capacitors: 5 nF to 100 μF ±10% ±0.02 nF * Twisted Pairs: Verify proper pairing in twisted pair cables### Physical DimensionsSpecific physical dimensions and weight for the Cirris Systems PW300 power supply are not explicitly detailed in the provided search results. However, the compatible testers, the Cirris Systems 1100R+ and 1100H+, have the following approximate dimensions:* **Cirris Systems 1100R+:** Main Unit: 14.5" x 6.75" x 2.5" (37 cm x 17 cm x 6 cm); Add-on Box: 6.25" x 6.75" x 2.5" (16 cm x 17 cm x 6 cm) * **Cirris Systems 1100H+:** Main Unit: 14.25” x 6.75” x 5.25” (36 cm x 17 cm x 13.5 cm); Add-on Box: 6.25” x 6.75” x 5.25” (16 cm x 13.5 cm x 13.5 cm)### CompatibilityThe Cirris Systems PW300 power supply is specifically designed to interface with and power the Cirris Systems 1100R+ and 1100H+ cable testers.Why Choose Aumictech for Cirris Systems PW300 Power Supply? At Aumictech, we specialize in supplying high-end cable testing equipment. Whether you need reliable power solutions for your Cirris 1100R+ or 1100H+ testers, expert technical support for system integration, or a dependable power source for your laboratory's testing protocols, our team ensures the Cirris Systems PW300 Power Supply delivers maximum performance for your application.