Elgar 1001C Linear AC Power Source 1kVA

The Elgar 1001C is a high-performance AC power source designed for demanding test and power applications, offering precise control and reliable AC power generation. This unit is engineered to simulate various power conditions, enabling comprehensive testing of equipment sensitivity and performance.

### Technical Specifications

* **Product Name:** Elgar 1001C AC Power Source
* **Manufacturer:** Elgar
* **Power Rating:** 1000 VA (1 kW)
* **Output Voltage Ranges:**
* 0-125 VAC (standard)
* 0-250 VAC (may also be available)
* **Output Current Range:** 0-8 A RMS, 0-16 A Peak
* **Output Frequency Range:**
* 45 Hz to 10 kHz at full rated power (requires external oscillator)
* 15 Hz to 10,000 Hz (with specific oscillators)
* 45 Hz to 5 kHz at full rated power (standard for SL/B series, expandable to 10 kHz)
* **Output Power Factor:** Unity to +/- 0.7 at full VA rating
* **Input Power Requirements:**
* 117 VAC, 20 A or 234 VAC, 10 A, single phase, 47-63 Hz
* 115 VAC, 30 A or 230 VAC, 15 A
* **Harmonic Distortion:** Typically below 0.3% midband for SL/B series
* **Physical:**
* Weight: 76 lbs
* Configuration: Benchtop/19″ rackmount (for SL/B series)

### Electrical Characteristics

* **Power Factor:** Capable of operating at unity to +/- 0.7 power factor at its full VA rating.
* **Load Compatibility:** Designed to drive non-linear rectifier loads, meeting requirements for testing modern switch-mode DC power supplies with a crest factor capability of 4:1 or greater.
* **Overload Protection:** Features overload and over-temperature protection.
* **Continuous Duty:** SL Series models can operate continuously at up to 150% of rated capacity into a linear resistive load.
* **Input Voltage Selection:** Input power can be configured for 115, 208, or 230 VAC at 47-63 Hz (380-420 Hz optional).

### Interfaces and Control

* **Programmability:** Can be programmed via IEEE-488 GPIB when used with a Plug-In Programmer, allowing control over voltage, frequency, phase angle, and voltage dropouts, with test readback of output parameters.
* **Oscillator Compatibility:** Can be driven by fixed, variable, or programmable plug-in oscillators. Note: Not compatible with 9000 series controllers.
* **Output Disconnect Relay:** Optional relay for output disconnect via GPIB.
* **Automatic Range Change:** Optional automatic output voltage range change via GPIB (PIP) for specific voltage configurations.

### Compatibility

* **Oscillators:** Requires an external oscillator for full frequency range operation.
* **Controllers:** Not compatible with 9000 series controllers.
* **Multi-phase Power:** Multi-phase power can be obtained by stacking two or three units driven by a single multi-phase Plug-In Oscillator.

### Physical and Environmental

* **Weight:** 76 lbs.
* **Form Factor:** The SL and B series are described as benchtop/19″ rackmount units.
* **Cooling:** Cooling air is drawn through side panel grills and exhausted at the rear.

### Documentation

* **Manuals:** User manuals for the Elgar 1001C and related models (e.g., 1001SLE, 1001SX, SL and B series) are available.

Why Choose Aumictech for the ELGAR 1001C?
At Aumictech, we specialize in supplying high-performance AC power sources. Whether you need precise simulation of diverse power conditions, reliable and clean AC power output, or robust testing capabilities for sensitive equipment, our team ensures the ELGAR 1001C delivers maximum performance for your application.