Elgar 1001SX AC Power Source

The Elgar 1001SX is a precision AC power source designed for testing and simulating a wide range of AC power conditions. It offers stable and accurate output voltage and frequency, making it suitable for various applications, including electronics manufacturing, aerospace, and compliance testing. This AC linear power source is capable of driving complex loads such as non-linear, capacitive input filter rectifier loads and meets the electrical power requirements for testing modern switch-mode DC power supplies. Its increased peak power capacity and reduced physical size make it ideal for both benchtop testing and automated DC power supply test systems. The Elgar 1001SX is part of the SX series, which provides single-phase, precision solid-state AC power outputs.

### Technical Specifications

**General**
* **Series:** SX Series
* **Product Type:** AC Power Source
* **Number of Phases:** Single-phase (for 1001SX-14)
* **Load Capability:** Designed to drive non-linear, capacitive filter rectifier loads, and modern switch-mode DC power supplies.
* **Peak Power Capacity:** Increased peak power capacity.
* **Repetitive Peak Current:** Up to 70 amps, depending on the model.
* **Crest Factor:** 4:1 (or greater).
* **Continuous Duty:** Capable of continuous duty at 150% of rated capacity into linear resistive loads.
* **Output Impedance:** Low effect output impedance.
* **Protection:** Overload and temperature protection.

**Electrical Specifications**
* **Input Voltage:**
* 115 VAC, 208 VAC, and 230 VAC standard inputs (single phase).
* User selectable; ±10% input variance.
* **Input Frequency:** 47 Hz to 63 Hz.
* Optional 400 Hz available.
* **Output Voltage Ranges:**
* Selectable via jumper change on the rear panel.
* Common ranges include 0-65 VAC, 0-130 VAC, and 0-260 VAC.
* Full rated VA is available from 55-65 VAC, 110-130 VAC, or 220-260 VAC.
* Consult Elgar for other voltage ranges.
* **Output Power:** 1000 VA (for 1001SX model).
* Full rated VA from 55-65 VAC, 110-130 VAC, or 220-260 VAC over a ±10% input variance and rated PF range.
* **Output Frequency Range:** 45 Hz to 1000 Hz at full rated power.
* **Line Regulation:** ±0.25% at rated load for a ±10% input variance.
* **Load Regulation:** ±1% from 45 Hz to 450 Hz with pulsed load or from 45 Hz to 1000 Hz with linear load.
* **Metering:**
* 0 to 300 VAC output voltmeter with ±3% accuracy.
* Provides readback of actual output voltage, current, frequency, power, and phase angle (in multi-phase systems, requires appropriately equipped Plug-in-Programmer).
* **Efficiency:** Up to 45%.

**Interfaces**
* **Front Panel Outputs:** Available.
* **Rear Panel Outputs:** Available.
* **Programmability:**
* Manual or IEEE-488 programmable using Elgar’s Plug-in Programmers (e.g., Series 9012).
* Programmable via IEEE-488 GPIB bus or locally from the front panel keypad.
* Range change relays allow switching between voltage ranges via GPIB or front panel.
* **Plug-in Oscillator:** Required for programmability (e.g., SL & B Series sources require a manual or Plug-in-programmer oscillator to determine programmability of output voltage, frequency, phase, etc.).

**Physical**
* **Dimensions:**
* Height: 7.00 inches for the 1001SX-14 model.
* Benchtop or 19″ rackmount units.
* Overall dimensions: 19″ W x 21″ D.
* **Configuration:** User selectable input voltage and output voltage ranges.

**Environmental**
* **Operating Temperature Range:** 0° to +55°C.
* **Operating Humidity Range:** Up to 95% non-condensing.

**Safety**
* **Hazardous Voltages:** High voltages in excess of 280 VAC, 396V Peak may be present at input and output terminal blocks.
* **Installation and Servicing:** Must be performed by qualified personnel aware of attendant hazards.
* **Electrical Shock Prevention:** Guard against risks of electrical shock during open cover checks by not touching any portion of electrical circuits. Capacitors may retain a charge even when power is off.
* **Safety Glasses:** Recommended during open cover checks to avoid personal injury from sudden component failure.
* **Ground Connection:** Ensure a power line ground connection is made to the INPUT POWER terminal block.
* **Output Labeling:** Customer/User must ensure output power and sense lines are properly labeled regarding safety hazards.

### Why Choose Aumictech for ELGAR 1001SX?
At Aumictech, we specialize in supplying high-end AC power source equipment. Whether you need robust and reliable testing capabilities, precise simulation of AC power conditions, or comprehensive compliance testing solutions, our team ensures the ELGAR 1001SX delivers maximum performance for your application.