Emerson / Artesyn / Astec MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479 1000W Power Supply

The Emerson / Artesyn / Astec MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479 is a 1000W power supply system from the MP1 series, designed for high-density, configurable power solutions. This power supply is built with a modular approach, allowing for a customized combination of output voltages and current ratings to meet specific application requirements. It is suitable for a wide range of industrial and potentially medical applications, given its features and certifications.

### Technical Specifications

**General:**

* **Manufacturer:** Emerson / Artesyn / Astec
* **Model:** MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479
* **Max Power Output:** 1000W
* **Case Size:** 2.5″ x 8″ x 11″
* **Available Slots:** 7
* **Input Voltage:** 85-264 VAC / 120-300 VDC
* **Input Frequency:** 50/60 Hz
* **Input Fuse (Internal):** 20A
* **Holdover Storage:** 20 ms minimum
* **Harmonic Distortion:** Meets EN61000-3-2
* **Radiated EMI:** CISPR 22/EN55022 Level “B”
* **Conducted EMI:** CISPR 22, EN55022 Curve B
* **Isolation:** Meets EN60950
* **Operating Temperature:** -20 °C to 50 °C (derates to 50% at 70 °C)
* **Storage Temperature:** -40 °C to 85 °C
* **Humidity:** 95% non-condensing
* **Shock/Vibration:** Mil-Hdbk 810E
* **Temperature Coefficient:** 0.02% per °C
* **MTBF (Field Demonstrated):** > 550,000 hours at full load, 220 Vac & 25 °C
* **Certifications:** UL, CSA, TUV, BABT, CB, CE Mark

**Features:**

* **Current Share:** On all outputs with ratings of 10 A or greater
* **Remote Sense:** On all outputs with ratings greater than 2 A
* **Overload Protection:** On all outputs
* **Voltage Adjustment:** On all outputs (manual or I2C)
* **Output Margining:** On all single output modules
* **Input-OK Signal:** Status indicator LED
* **Global DC-OK Signal:** Status indicator LED
* **Global Inhibit/Enable:** TTL Logic “1” and Logic “0”
* **Individual Module Inhibit/Enable:**
* **Output Sequencing:** Configurable UP/DOWN
* **Current Limit:** Configurable (foldback or constant current)
* **Power Factor Correction:** Active, meets EN61000-3-2
* **Cooling:** Forced air cooling, field replaceable fan (P/N 73-688-0001)
* **Intelligent Fan:** Speed control/fault status
* **Isolated 5V Bias Voltage:**
* **Low Leakage Option:** Available for medical applications
* **Conformal Coating:** Optional
* **SEMI F47 Compliance:** Optional extended hold-up module

**Output Module Configuration (MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479):**

* **Slot 1 (1L):** Configuration details not fully specified for this exact model number, but “L” typically denotes a specific output voltage/current configuration.
* **Slot 2 (1N):** Configuration details not fully specified for this exact model number, but “N” typically denotes a specific output voltage/current configuration.
* **Slot 3 (1J):** 10V at 18A
* **Slot 4 (1J):** 10V at 18A
* **Slot 5 (1Q):** 24V at 3A
* **Slots 4LL & 4NN:** These indicate additional output modules or options. Specific voltage and current ratings for these are not detailed in the provided snippets for this exact model number. However, based on the general MP1 series, these would represent further configurable DC-DC converter modules.
* **Modified Standard Code:** 479

**Note on Specific Module Configurations:** The full alphanumeric string in the part number (e.g., `1L`, `1N`, `1J`, `1Q`, `4LL`, `4NN`) represents the specific configuration of output modules installed in the power supply chassis. The exact voltage and current for all modules may require consulting the detailed product datasheets or configuration guides. For instance, `1J` is specified as 10V/18A, and `1Q` as 24V/3A. The `4LL` and `4NN` indicate specific module types or options that are not fully elaborated upon in the general documentation.

### Interfaces

* **Control Connector:** Mating Housing: Molex 90142-0010 or Amp 87977-3
* Pins include: Global Inhibit, Remote Sense (V1, V2), Current Share (SWP), Module Inhibit return, Internal References (1.5V, 3.0V).
* **I2C Control:** Available for intelligent control, monitoring of voltage, current, and temperature, and programmable settings

### Physical

* **Dimensions:** 2.5″ (H) x 8″ (W) x 11″ (L)
* **Weight:** Approximately 12 lbs /ea (for a similar model MP1-1L-1L-1E-1M-NIN-00-600)

### Compatibility

* The MP1 series is part of Artesyn’s Intelligent MP (iMP) series, designed for high-density, configurable power solutions.
* The iMP series accepts intelligent DC-DC converter modules with single, dual, or triple outputs, allowing for thousands of output combinations.

Why Choose Aumictech for Emerson / Artesyn / Astec MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479?
At Aumictech, we specialize in supplying high-end configurable power supply systems. Whether you need robust power conversion for demanding industrial environments, modular flexibility to adapt to evolving system requirements, or reliable performance backed by extensive testing, our team ensures the Emerson / Artesyn / Astec MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479 delivers maximum performance for your application.