Emerson / Artesyn / Astec MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567 1000W Power Supply

The Emerson / Artesyn / Astec MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567 is a 1000W modular power supply system designed for demanding industrial and enterprise applications. This configurable power supply offers a high degree of flexibility, allowing for customization to meet specific voltage and current requirements across multiple outputs. Its robust design ensures reliable and efficient power conversion, making it suitable for critical systems where consistent power delivery is paramount.

## Technical Specifications

### General
* **Manufacturer:** Emerson / Artesyn / Astec (This model series was originally developed by Astec, which was later acquired by Emerson Network Power, and then Emerson’s Data & Power Solutions business was acquired by Artesyn Embedded Technologies.)
* **Model Number:** MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567
* **Series:** MP1 (MVP Series)
* **Maximum Output Power:** 1000 W
* **Input Voltage Range:** 85 – 264 VAC / 120 – 350 VDC
* **Configurations:** Modular with up to 7 available slots for output modules
* **Chassis:** MP1 Case Size: 2.5 x 8 x 11 inches
* **Cooling:** Internal DC fan; field replaceable fan. Optional customer-provided air.
* **Operating Temperature:** -20 °C to 50 °C (derated from 0 °C for full output). Derates each output linearly to 50% at 70 °C. Operation at -20 °C to 40 °C is possible with rear air option.
* **Storage Temperature:** -40 °C to 85 °C
* **Humidity:** 95% non-condensing
* **Shock/Vibration:** Meets Mil-Hdbk 810E standards.
* **MTBF:** Demonstrated > 550,000 hours at full load, 220 Vac & 25 °C ambient conditions.

### Output Module Configurations (for MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567)
* **Slot #1 (1L):** 12V at 17A, Part Number: 73-551-0012
* **Slot #2 (1N):** 15V at 2A, Part Number: 73-551-0015
* **Slot #3 (1Q):** 24V at 3A, Part Number: 73-551-0024
* **Slot #4 (1L):** 12V at 17A, Part Number: 73-551-0012
* **Slot #5 (1I):** 8V at 2A, Part Number: 73-551-0012
* **Slot #6 (1J):** 10V at 2.5A, Part Number: 73-551-0012
* **Slot #7 (NNI):** Configuration not specified in available data, but is an available slot.
* Additional outputs listed in one source include: Output 7: 15V at 1A, Output 8: 15V at 1A, Output 9: 8V at 1A. It is unclear if these are associated with the NNI slot or represent additional available module types.

### Electrical Features
* **Current Share:** Supported on all outputs with ratings of 10 A or greater.
* **Remote Sense:** Supported on all outputs with ratings greater than 2 A.
* **Overload Protection:** Provided on all outputs.
* **Voltage Adjustment:** Available on all outputs (± 10% minimum adjustment range).
* **Margining:** Supported on all single output modules (± 4 – 6% nominal).
* **Output Regulation (Overall):** 0.4% or 20mV maximum.
* **Ripple:**
* RMS: 0.1% or 10mV (whichever is greater).
* Peak-to-Peak: 1.0% or 50mV (whichever is greater), bandwidth limited to 20 MHz.
* **Dynamic Response:** Less than 2% or 100 mV with a 25% load step. Recovery time to within 1% in less than 300 µsec.
* **Short-circuit Protection:** Enabled on outputs. Auto-recovery upon removal of short.
* **Overvoltage Protection:** Provided on single output modules (specific ranges vary by voltage, e.g., 2-5.5 V modules: 122-134%; 6-60 V modules: 100-120%). No overvoltage protection on triple output modules.
* **Input Fuse:** Internal 20A fuse for MP1 series.
* **Power Factor Correction:** Yes.
* **Harmonic Distortion:** Meets EN61000-3-2.
* **Isolation:** Meets EN60950 standards.
* **AC OK Signal:** >5 ms early warning before outputs lose regulation. Status Indicator LED.
* **Global DC OK Signal:** Provided with status indicator LED.
* **Global and Individual Module Inhibit/Enable:** Supported.
* **Isolated 5V Bias Voltage:** Available.

### Interfaces
* **Remote Sense:** Available on outputs rated greater than 2A.
* **Logic Signals:** Global Inhibit/Enable (TTL, Logic “1” and Logic “0”).

### Physical
* **Chassis Dimensions:** 2.5 inches (height) x 8 inches (width) x 11 inches (depth)
* **Weight:** Not specified in available documentation.
* **Terminal Block:** One unit noted to have a chipped terminal block, but remains fully functional.

### Compliance and Safety
* **Radiated EMI:** CISPR 22/EN55022 Level “B”.
* **Conducted EMI:** CISPR 22/EN55022 Curve B.
* **Safety Approvals:** UL (UL1950), CSA (CSA22.2 No. 234 Level 5).
* **European CE Mark:** Meets requirements.
* **Immunity Standards:** Meets EN61000 immunity standards.
* **Low Leakage Option:** Available for medical applications.

### Compatibility
* **Other MP Series Power Supplies:** This unit is part of the broader Emerson/Artesyn/Astec MP Series, which includes models ranging from 400 to 1200 Watts with various output configurations.
* **Filter/Rectifier Boards:** Compatible with MP1 1000W Power Supply.

Why Choose Aumictech for Emerson / Artesyn / Astec MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567?
At Aumictech, we specialize in supplying high-reliability power solutions. Whether you need a highly configurable, high-density power supply like the Emerson / Artesyn / Astec MP1-1L-1N-1Q-1L-1I-1J-NNI-00-567 for complex industrial automation, robust power for critical IT infrastructure, or precise voltage regulation for laboratory equipment, our team ensures your power supply delivers maximum performance and reliability for your application.