The HP/Agilent 6031A is a system autoranging DC power supply delivering 0–20 V and 0–120 A with 1064 W maximum power output. Autoranging capability eliminates manual reconfiguration, allowing the supply to transition across three operating points—20 V/50 A, 14 V/76 A, and 7 V/120 A—while maintaining maximum available power. This eliminates the need for multiple supply units and reduces system footprint.
– Technical Specifications
Output Ratings
• Voltage: 0–20 V
• Current: 0–120 A
• Maximum Power: 1064 W
Programming and Readback Accuracy (25°C ±5°C)
• Voltage Programming: 0.035% + 15 mV
• Current Programming: 0.25% + 250 mA
• Voltage Readback: 0.08% + 7 mV
• Current Readback: 0.4% + 100 mA
Output Ripple and Noise (20 Hz to 20 MHz)
• Voltage RMS: 8 mV
• Voltage Peak-to-Peak: 50 mV
• Current RMS: 120 mA
Load and Line Regulation
• Voltage Load Regulation: 0.01% + 5 mV
• Current Load Regulation: 0.01% + 10 mA
• Voltage Line Regulation: 0.01% + 2 mV
• Current Line Regulation: 0.01% + 2 mA
Transient Response
• 10% Step Change: 2 ms
– Key Features
• Constant voltage and constant current operation modes
• Overvoltage, overcurrent, and reverse polarity protection with foldback limiting
• Series and parallel operation capability
• Ten-turn potentiometers for precise local front-panel control
• Built-in self-test and diagnostics
• GPIB interface with support for up to 16 units daisy-chained via single GPIB address
• Analog/resistance remote control of voltage and current
• SCPI command support and VXIPlug&Play drivers
– AC Input Options
Optional input voltage ranges include 87–106 Vac (75% derated output), 104–127 Vac, 191–233 Vac, and 209–250 Vac, all at 47–63 Hz. Input current requirements vary by selection.
– Typical Applications
Automated test systems, industrial power applications, and multi-unit test benches requiring dynamic voltage and current adjustment without reconfiguration.
– Physical Characteristics
• Weight: 16.3 kg (36 lb)
• Dimensions: 425.5 mm W × 132.6 mm H × 503.7 mm D
Reviews
There are no reviews yet.