HP / Agilent 8165A 50 MHZ PULSE/FUNCTION GENERATOR

The HP/Agilent 8165A is a 50 MHz programmable pulse and function generator delivering precise, multi-waveform signal generation across 1.000 mHz to 50.00 MHz. Built for laboratory and field testing, it generates sine, square, and triangle waveforms to 50.00 MHz, plus pulse and ramp outputs to 19.99 MHz with selectable duty cycles and symmetry. Frequency resolution reaches 1 µHz in the millihertz band, with ±0.001% accuracy and ±1 × 10⁻⁴ synthesizer stability—enabling tight tolerance measurements in component characterization, circuit validation, and system integration workflows.

## Technical Specifications

**Frequency Performance**
• Range: 1.000 mHz to 50.00 MHz
• Resolution: 1 µHz (1 to 9.999 mHz range)
• Accuracy: ±0.001%
• Stability: ±1 × 10⁻⁴ (synthesizer)

**Waveform Generation**
• Sine, Square, Triangle: DC to 50.00 MHz (50% duty cycle for square)
• Pulse, Ramp: DC to 19.99 MHz (20%, 80% symmetry options)
• Haversine/Havertriangle: Available via special option

**Output Parameters**
• Amplitude into 50 Ω: 10.0 mVpp to 10.0 Vpp
• Amplitude into 1 kΩ: 2.00 Vpp to 20.0 Vpp
• DC Offset into 50 Ω: ±0 to ±5.00 V
• DC Offset into 1 kΩ: ±0 to ±10.0 V
• Independent amplitude and offset control within ±10 V window
• Source Impedance: 50 Ω ±1% or 1 kΩ ±10% (selectable)

**Signal Quality**
• Sine THD (fundamental to 1 MHz): 38 dB
• Harmonic distortion (fundamental >1 MHz): ≤ -30 dBc

## Key Features

• Operating modes: Normal, VCO (external), Triggered, Gated, Burst, FM, AM
• Sweep and Amplitude Modulation (Option 002)
• Trigger, gate, and counted burst capabilities
• Non-volatile storage: Ten complete parameter sets with battery backup
• HP-IB interface: Full programmability via front panel or remote command

## Typical Applications

Component testing, circuit characterization, frequency response analysis, modulation studies, and system integration validation.

## Compatibility & Integration

HP-IB control enables integration into automated test benches and remote measurement systems. Rear panel connector option (Option 003) accommodates fixed-installation configurations. Operating temperature minimum: -10 °C.