NI PCI-6289 Multifunction M Series Data Acquisition Module

The NI PCI-6289 is a multifunction data acquisition module delivering 32 single-ended (or 16 differential) analog input channels, 4 analog output channels, 48 digital I/O lines, and 4 counter/timers on a single PCI board. Operating at 1 MS/s aggregate sampling with 16-bit resolution and dual ADCs for simultaneous multi-channel acquisition, it serves demanding measurement and control applications across laboratory, industrial, and system integration environments.

– Technical Specifications

Analog Input
• 32 single-ended or 16 differential channels
• 16-bit resolution; 14.3 ENOB at 1 MS/s, 15.3 ENOB at 100 kS/s
• 1 MS/s aggregate and per-channel sampling rate
• Software-selectable ranges: ±10 V, ±5 V, ±1 V, ±0.2 V
• AC or DC coupling (software-selectable)
• Input impedance: 10 MΩ || 80 pF (unbuffered); 300 kΩ || 30 pF (buffered)
• Dual ADCs enable simultaneous sampling from two channel banks
• 8 MS onboard memory

Analog Output
• 4 channels, 16-bit resolution
• ±10 V output range
• 625 kS/s per-channel update rate; 1 MS/s aggregate
• 10 mA output drive; 6 V/µs slew rate
• DC coupling

Digital I/O
• 48 unidirectional channels
• 5 V TTL/CMOS compatible
• Programmable direction per port

Counter/Timers
• 4 × 32-bit general-purpose counter/timers
• 100 MHz base clock; 50 ppm timebase accuracy
• Event counting, edge counting, pulse generation, PWM, quadrature encoding, period and frequency measurement

Synchronization
• Onboard clocks: 100 MHz, 10 MHz, 20 MHz
• User-definable sample clocks
• Digital, analog edge, analog window, and software triggers

Power & Physical
• +5 V DC @ 3.0 A; +12 V DC @ 1.0 A; -12 V DC @ 0.5 A
• Typical consumption: 21.5 W
• PCI interface (32-bit, 33 MHz)
• Three 68-pin shielded female VHDCI connectors
• Operating temperature: 0 °C to 55 °C
• Standard PCI form factor

– Key Features

• Dual-ADC architecture for synchronous multi-channel sampling
• 8 MS waveform buffer reduces host processor overhead
• Software-configurable input coupling and gain per channel
• Flexible digital I/O with programmable direction
• Four independent 32-bit timers with extended measurement capabilities

– Typical Applications

• Multi-channel sensor data logging and real-time analysis
• Closed-loop control systems requiring synchronized input/output
• Transient capture and waveform analysis
• Counter-based measurements (frequency, period, pulse width)
• PWM and quadrature encoder interfacing

– Compatibility & Integration

The PCI-6289 integrates with NI LabVIEW, LabWindows/CVI, and traditional C/C++ development environments via standard NI-DAQmx drivers. VHDCI connectors accommodate off-the-shelf cabling and signal conditioning accessories.