Teledyne LeCroy HVD3605A High Voltage Differential Probe, 100MHz

The Teledyne LeCroy HVD3605A is a high-voltage differential probe engineered for precision measurement of differential signals in demanding power electronics environments. Operating at 100 MHz bandwidth with 1% gain accuracy and exceptional common-mode rejection, it delivers clear signal acquisition in high-noise conditions. The probe supports floating measurements up to ±7600 V (DC + peak AC) with dual attenuation settings, making it suitable for applications spanning 120/240 V switch-mode power supplies through 5 kV class electrical apparatus. Safety-rated to 6 kV CAT with 6000 Vrms continuous capability and 8485 V peak rating, the HVD3605A integrates via ProBus active probe interface with automatic scaling, eliminating external power requirements.

– Technical Specifications

Bandwidth: 100 MHz
Rise Time (10 to 90%): 4.3 ns
Gain Accuracy: 1%
Cable Length: 6 m standard (6.8 m also specified)
Attenuation Ratios: 200:1, 2000:1

Differential Voltage Range:
• High Attenuation: 7000 V (DC + peak AC) at 28–2000 V/div with ±6000 V offset; 7600 V maximum before saturation
• Low Attenuation: 700 V (DC + peak AC) at 300 mV–27.5 V/div with ±600 V offset

Common-Mode Voltage Range: ±7600 V (DC + peak AC), 6000 Vrms

Input Impedance:
• Between inputs: 48 MΩ || 2.5 pF
• Either input to ground: 24 MΩ || 5.0 pF

– Key Features

• Safety Rating: CAT III 1500 V, CAT I 8485 V; rated for 6000 Vrms and 8485 V peak
• Coupling: AC and DC
• Common-Mode Rejection: Exceptional CMRR across broad frequency range
• Offset Capability: High offset at both attenuation settings
• AutoZero: Drift calibration with auto disconnect switch; no lead removal required
• ProBus Interface: Active probe interface with automatic scaling and integrated power delivery

– Typical Applications

High-voltage differential measurements in switch-mode power supplies, 600 V class apparatus, and 5 kV class electrical systems.

– Compatibility & Integration

Wide oscilloscope compatibility via ProBus interface. Multiple clip configurations supplied: alligator clips (CAT I 2000 V, CAT II 1000 V), crocodile clips (CAT I 6000 V, CAT III 1000 V), pincer clips (CAT II 1000 V), plunger hooks (CAT II 1000 V), and spade terminals (CAT III 1000 V).