Teledyne LeCroy T3DSOH1202-ISO – Handheld Oscilloscope (200 MHz)

The Teledyne LeCroy T3DSOH1202-ISO is a 200 MHz, two-channel handheld digital oscilloscope with isolated inputs for safe floating measurements in field and benchtop applications. This instrument combines oscilloscope, waveform recorder, and digital multimeter capabilities into a single portable platform. Built for demanding environments, it features an IP51-rated dust and drip-proof housing, battery-powered operation with a 6900 mAh lithium battery pack, and ergonomic design with glove-friendly controls.

– Technical Specifications

Oscilloscope Core
• Bandwidth: 200 MHz
• Analog channels: 2 (isolated)
• Sample rates: 1 GSa/s (single channel), 500 MSa/s (dual channel)
• Vertical resolution: 8-bit
• Vertical range: 2 mV/div to 100 V/div
• Maximum acquisition memory: 12 Mpts/channel (single), 6 Mpts/channel (interleaved dual)
• Input impedance: 1 MΩ – 14 pF
• Calculated rise time: 2 ns
• Display: 5.6-inch color TFT-LCD, 640 × 480 pixels, 24-bit depth
• Waveform capture: Up to 100,000 waveforms/second (normal mode), 400,000 waveforms/second (sequence mode)
• History waveform recording: Up to 80,000 frames
• Sequence acquisition: Up to 80,000 segments

Triggering & Decoding
Intelligent trigger types: Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern. Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN protocols. HDTV-compatible video trigger.

Digital Multimeter
• CAT III 600 V / CAT II 1000 V isolated inputs
• 6000 counts resolution
• True-RMS AC measurements on voltage and current
• DC/AC voltage, DC/AC current, resistance, diode test, capacitance, continuity
• Current measurement: Up to 10 A with included adapters

– Key Features

• Isolated input channels eliminate grounding concerns for floating measurements
• 256-level intensity grading and color temperature display modes
• Dual-function probe inputs accommodate 250 MHz PB925 probes
• Isolated USB Host and USB Device connectivity with SCPI remote control support
• UL2054-certified battery with external charger
• Rubberized housing with large keys for cold-weather operation

– Typical Applications

Isolated measurements on industrial equipment, power supply diagnostics, embedded system debugging, field service troubleshooting, automotive electronics analysis, and multi-protocol serial bus verification.

– Compatibility & Integration

USB connectivity via isolated USB Host and MicroUSB Device (TMC). Supports SCPI remote control commands. Includes 250 MHz PB925 probes, multimeter test leads, current measurement adapters (SCD600MA, SCD10A), and USB cable.