Teledyne LeCroy WaveRunner 9054-MS – 500MHz, 20 GS/s, 4 Channel Mixed Signal Oscilloscope

The Teledyne LeCroy WaveRunner 9054-MS is a 500 MHz, 4-channel mixed-signal oscilloscope engineered for high-speed digital and analog signal characterization. It combines analog bandwidth with 16 digital channels, delivering simultaneous capture of complex mixed-signal interactions. The instrument samples analog signals at up to 20 GS/s across two channels with 11-bit vertical resolution, enabling precise signal reconstruction for edge speeds down to 480–700 ps. Digital channels operate independently at 1.25 GS/s, supporting protocol decoding and logic-level analysis across 16 lines.

The 15.4-inch WXGA capacitive touch display runs the MAUI interface with OneTouch gesture control, enabling rapid cursor positioning, source switching, and waveform manipulation. Memory depth reaches 16 Mpts/channel standard, with optional 32 Mpts/channel or 64 Mpts/channel configurations for extended capture windows. An Intel Core i5-6500 processor with up to 16 GB RAM drives real-time analysis at triggered waveform rates up to 1,000,000 wfm/s.

– Technical Specifications

• Bandwidth: 500 MHz
• Analog Channels: 4
• Digital Channels: 16
• Sample Rate: Up to 20 GS/s (2 analog channels); 1.25 GS/s (digital channels)
• Vertical Resolution: Up to 11 bits
• Memory: 16 Mpts/channel standard; 32 Mpts/channel or 64 Mpts/channel optional
• Display: 15.4″ WXGA (1280 × 800 pixels), capacitive touch
• Input Impedance: 50 Ohms
• Sensitivity: 1 mV/div to 10 V/div
• Rise/Fall Time: 480–700 ps
• Input Coupling: AC, DC, GND
• Offset Range: ±10 V at 20 mV/div; ±4 V at 5 mV/div; ±1.6 V at 1 mV/div
• Processor: Intel Core i5-6500, 3.2 GHz quad-core; up to 16 GB RAM
• Waveform Update Rate: 1,000,000 wfm/s (triggered)
• Trigger Modes: Auto, Normal, Single, Stop

– Key Features

• MAUI with OneTouch for intuitive touch-based operation and gesture control
• Serial Data Analysis (SDAIII): Eye diagrams, jitter decomposition (Tj, Rj, Dj), 29+ protocol standards
• Math Functions: Up to 8 traces supporting Average, Difference, Invert, Product, Ratio, Reciprocal, Rescale, Sum, and FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared)
• Advanced protocol triggering and decoding for analog, digital, and serial debugging
• Cubic interpolation for waveform reconstruction

– Typical Applications

• Mixed-signal debugging and validation
• Serial protocol analysis and characterization
• High-speed digital signal integrity assessment
• Analog circuit performance verification

– Compatibility & Integration

The oscilloscope accepts standard probes with 50 Ohm input impedance and supports AC/DC/GND coupling modes for flexible signal conditioning.