The Teledyne LeCroy ZS1500 is a 1.5 GHz active voltage probe engineered for high-impedance measurements with minimal circuit loading. Its 1 MΩ input resistance and 0.9 pF input capacitance preserve signal integrity across the full bandwidth, making it ideal for characterizing fast transients and digital signals in complex circuit environments.
The probe operates at 10X attenuation with an input dynamic range of ±8 V and supports offset adjustment up to ±12 V, enabling precise measurement of small signals riding on large DC levels. The 20 V non-destructive voltage rating provides margin against accidental overstress during field measurements.
– Technical Specifications
• Bandwidth: 1.5 GHz
• Input Resistance: 1 MΩ
• Input Capacitance: 0.9 pF
• Attenuation: 10X (÷10)
• Input Dynamic Range: ±8 V
• Offset Range: ±12 V
• Non-Destructive Voltage: 20 V
• Cable Length: 1.3 m
• Coupling: 50 Ω, GND
– Key Features
• ProBus interface enables automatic setup and measurement control from the oscilloscope front panel
• Compact probe head: 61 mm × 7.3 mm × 13.1 mm, weighing 100 g
• Accepts .635 mm square pins and .91 mm round pins
• Extensive tip accessory library including right-angle leads, Y-adapters, pico hooks, ground blades, copper pads, insulated IC leads, bent sharp tips, and discrete SMD tips
• Innovative grounding design minimizes ground loop inductance for highest signal fidelity
• Operating temperature range: 0°C to 50°C; storage rated to -40°C to 71°C
• Maximum operating altitude: 2000 m
– Compatibility & Integration
The ZS1500 integrates with all ProBus-equipped Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower, including WaveSurfer 3000z, WaveSurfer 4000HD, HDOxxxx, WaveRunner 9000, WaveRunner 8000HD, MDA 8000HD, WavePro HD, and WaveMaster / SDA / DDA 8 Zi-B platforms. Compatible firmware version: 4.9.3 or later.
Reviews
There are no reviews yet.